User's Manual
Table Of Contents
- Contents
- List of Tables
- List of Figures
- 1 Introduction and Important Notes
- 2 Overview
- 3 Planning a HiPath Cordless IP System
- 3.1 Planning According to Call Traffic Load
- 3.2 General
- 3.3 Propagation Conditions for Radio Traffic
- 3.4 Determining the Installation Site
- 3.5 Installing Base Stations
- 4 Putting Into Service
- 5 Installation and Administration
- 5.1 Terminology
- 5.2 Network Concept
- 5.3 Synchronisation over air concept
- 5.4 WBM related issues
- 5.5 Phone related issues
- 5.6 Partition concept of BSIP1
- 5.7 Factory reset of BSIP1
- 5.8 Release notes
- 5.9 Quick Start
- 5.10 Quick start overview
- 5.11 Prepare and connect hardware
- 5.12 Configure BSIP1 for IWU mode
- 5.13 Configuration of VoIP (Infrastructure) network
- 5.14 Configuration of DECT network
- 5.15 Configuration of users at the PBX
- 5.16 Configuration of users at the BSIP IWU
- 5.17 Start system services and register handsets
- 5.18 Configure further BSIP Only to the system
- 5.19 "Quick Start" Completion
- 5.20 Further steps
- 5.21 Configuration reference
- 5.22 WBM overview
- 5.23 Administration
- 5.24 "Network/Gateways" Configuration
- 5.25 "Group" Configuration
- 5.26 Users Configuration
- 5.27 Dect Configuration
- 5.27.1 Configuration Page "Dect - Device"
- 5.27.2 Configuration Page "Dect - Sync"
- 5.27.3 Configuration Page "Dect - ARI"
- 5.27.4 Configuration Page "Dect - About"
- 5.27.5 Configuration Page "Dect - Radio" (Advanced mode)
- 5.27.6 Configuration Page "Dect - Call" (Advanced mode)
- 5.27.7 Configuration Page "Dect - Debug" (Advanced mode)
- 5.27.8 General DECT configuration
- 5.28 Debugging Configuration
- 5.29 "Status" Configuration
- 5.30 "System" Configuration
- 5.31 Configuration Hints for PBXs
- 5.32 HiPath OpenOffice EE
- 5.33 HiPath OpenOffice ME
- 5.34 Troubleshooting / FAQ
- 5.35 Configuration hints for Web Browser
- 6 Technical Data
- 7 Diagnosis and Maintenance
- 8 Open Source Software used in the Product
- Index
bkLOF.fm
A31003-C1010-S100-2-7620, 08/2010
HiPath Cordless IP, Service Manual 9
Nur für den internen Gebrauch List of Figures
List of Figures 0
Figure 1 General Overview of the HiPath Cordless IP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 2 Optimum system synchronization over DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Figure 3 Not optimally synchronized, each DECT IP base station has only one synchronization partner
21
Figure 4 Protocols of the path between Handset and Communication Server. . . . . . . . . . . . . . . . . . 22
Figure 5 Depicts all communication channels of the HiPath Cordless IP System . . . . . . . . . . . . . . . 22
Figure 6 DECT IP base station BSIP1 (Item number: U30807-S5494-X) . . . . . . . . . . . . . . . . . . . . . 25
Figure 7 Outdoor case with DECT IP base station. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Figure 8 PoE Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 9 Base station distribution in buildings of brick and light construction materials . . . . . . . . . . . 37
Figure 10 Base station distribution in interiors of brick and light construction materials. . . . . . . . . . . . 39
Figure 11 Base station distribution in interiors with concrete and steel dividing walls . . . . . . . . . . . . . 41
Figure 12 Base station distribution for base stations with housing for outdoor use . . . . . . . . . . . . . . . 43
Figure 13 Base station distribution for coverage of an outdoor area . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Figure 14 Components for outdoor installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Figure 15 Outdoor housing with base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 16 Outdoor housing with mounting plate and mast blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 17 Mast installation – plan view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 18 Wall mounting without mounting plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Figure 19 LED position on the base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Figure 20 Measurement result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Figure 21 Building - Base station installation site/radio area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Figure 22 Outdoors - Base station installation site/radio area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172