User's Manual

2. Select the entry you want to delete then press the FWD key until you see the
Delete Entry option displays. Press SELECT to remove the entry.
Or, you can also delete an entry by pressing the DELETE key while the entry is displayed.
Deleting the Directory
To delete ail entries in the directory:
1. Access the Directory menu.
2. You will see the first entry in the directory list on your display. Press SELECT then press FWD until you see "Delete
Directory" on your screen.
3. Press SELECT. You
are prompted to enter Enter System - PIN:
the 4-digit PlN - - - -
(Personal Identification
Number).
4. Once the PIN is accepted by the system, you are prompted to confirm the deletion of all entries in the directory. Press
SELECT to continue. You will see the message "All Entries Deleted" on your screen. To cancel the action, press the DIR
or MENU key.
Checking Memory in the Directory
To display the amount of available memory in the directory:
1. Access the Directory menu.
2. You will see the first
entry in the directory
on your display. Press
SELECT and then press FWD until you see the "Check
Memory' option on your screen. Press SELECT.
The percentage of the total available memory in the directory is shown on the second line of your display.
Accessing the Directory from the Cordless Handset
You can access the Directory menu on the cordless handset by pressing the MENU key and then selecting Directory from the
main menu.
Use the up arrow or down arrow key to move through the selections. As you scroll through the menu, the first option is always
highlighted. To select an option, press the OK key.
If at any time you want to exit the current level or cancel a task, either press the key (this key is located to the left of the OK
key) or press the MENU key. Depending on which menu you are in, you might not always see the key. If this is the case, you
can always exit the Directory by pressing the MENU key.
Working with the Directory Menu from the Cordless Handset
Using the Directory menu, you can:
create a new entry
delete the entire directory