User's Manual

COMMUNICATION CERTIFICATION LABORATORY TEST REPORT: 73-6954
FCC ID: L82-242240
Page 107 of 129
Exhibit 8
Selecting a Ring Tone
1. Press MENU.
2. Press the
6
key twice to move to “RING TONE?”.
3. Press OK .to select “RING TONE?”(current tone will sound).
4. Press 1 , 2 , 3 , or 4 to change the ring tone (selected
tone will sound).
5. Press OK to save the ring tone setting.
6. Press MENU to exit.
Selecting Tone or Pulse Dialing
To set the dial mode used by your local phone service (tone or
pulse),
1. Press MENU.
2. Press the
6
key three times to move to “DIAL MODE?”
3. Press OK .to select “DIAL MODE?”.
4. Press the
5
or
6
key to change between tone and pulse.
5. Press OK to select dial tone setting.
6. Press MENU to save the setting.
Storing Your Local Area Code (for use with Caller ID services)
When you program a local area code, calls from that area code
will be stored in the call log without the area code. This makes
4
RING TONE?
DIAL MODE?
RING TONE
2
4
DIAL MODE?
YOUR AREA CODE?
TONE DIAL
5 6
TO CHANGE
PULSE DIAL
5 6
TO CHANGE
OR