User's Manual

6 Check if the contact spring connectors at the door frame and the
door to the examination room are free of residues, such as
cleaning agents, oil, grease, paint splatters, blood drops, etc.
Shutting down the system (System Off)
Shutting down the system includes the following steps:
◾ Shutting down the computer system
◾ Switching off the MR system at the alarm box
When shutting down the system, the software of the syngo MR
Workplace is automatically ended as well.
Prior to shutting down the system, the patient table should be in the
Home Position.

To avoid possible data losses at the syngo MR Workplace, shut
down the syngo MR Workplace before the syngo Acquisition
Workplace.

If the user is logged on, the system must be shut down using
System > Control... or System > End Session. Otherwise, data
are lost.
✓
All data have been saved - at the syngo Acquisition Workplace as
well as at the syngo MR Workplace.
1 Select System > End Session at the syngo Acquisition Workplace.
The End Session dialog window is displayed.
5.2.2
Shutting down the computer
system
MR system operation 5
MAGNETOM Skyra
fit
| syngo MR E11
103
Print No. M6-04401.621.02.02.02