User's Manual

3 Select the Shutdown System option.
The computer system shuts down.

In case of problems during shutting down, see troubleshooting
information: ( Page 103 Shutting down the computer system)
Starting/ending Standby
Standby can be switched on by using the System Manager in the
syngo MR software. See: Software operator manual
1 Select System > Control to open the System Manager.
2 To start Standby: On the Meas & Recon tab, click the Standby
button.
The System Manager - Scanner StandBy dialog box opens.
3 To end Standby: At the alarm box, press the SYSTEM ON button.
Preparing the MR system
To use the holder for infusion bottles you can position the rod on the
right side of the patient table (head end). If not in use, you can clamp
the holder in the affixing elements at the side of the table.
5.2.4
5.3
MR system operation 5
MAGNETOM Skyra
fit
| syngo MR E11
105
Print No. M6-04401.621.02.02.02