User's Manual
Manuals
Brands
Siemens Medical Solutions, Department MED EH&S Manuals
Electronics
Physiological Pulse Unit
121
122
123
124
125
126
127
128
129
130
Table Of Contents
Table of contents
Introduction
Layout of the operator manual
The current operator manual
Intended use
Authorized operating personnel
Definitions of different persons
Safety
Preface about safety
Hazards and risks
Common causes of accidents
Responsibility
Configuration of hazard hints
Common/permanently existing hazards
Electromagnetic fields
Safety instructions on the static magnetic field
Safety instructions on RF and gradient fields
Contraindications
Mechanical hazards
Compatibility
What else must be observed?
Ambient conditions
Access to the examination room
Noise development
Patient care
Artifacts and imaging errors
Maintenance/repair
Signs and symbols
System owner-related advices
Coils/quality assurance
In case of emergency
Emergency switches
Medical emergency
Coolant accidents
Fire/Fire fighting
MR system components
Overview MR system
About function
Super-conducting magnet
Electronics cabinets
RF coils
syngo Acquisition Workplace
Host
Data recording
Monitor
Keyboard
Mouse
syngo MR Workplace (optional)
System control
Description
Operating the Dot display
Patient table
Description
Operating the patient table
Dockable patient table
Description
Operating the dockable patient table
Laser light localizer
Using the laser light localizer
Alarm box
Description
Checks
Intercom
Description
Operating the intercom
In-Room syngo Acquisition Workplace
Description
Operating the In-Room syngo Acquisition Workplace
Other components and accessories
Gradient supervision
Physiological imaging
Triggering methods
Prospective triggering
Retrospective gating
Physiological Measurement Unit (PMU)
Description
Preparing the measurement
ECG triggering
Description
Performing
Pulse triggering
Description
Performing
Respiratory triggering
Description
Performing
External triggering
Input for external trigger signal
Performing
MR system operation
Daily functionality checks
Checking the functionality and cleanliness
Starting up and shutting down the MR system
Starting the system (System On)
Shutting down the system (System Off)
Shutting down the syngo MR Workplace
Starting/ending Standby
Preparing the MR system
Connecting the squeeze bulb
Setting tunnel conditions
Preparing the patient
Informing the patient
Physiological effects
Operating modes
Exposure to low frequency electromagnetic fields
Exposure to RF electromagnetic fields
Starting/Stopping the measurement
Starting the measurement
Stopping the measurement
Maintenance
Cleaning
Cleaning the LCD monitor/video display
Cleaning the camera lens
Cleaning the data carrier
Cleaning the plugs and connectors
Cleaning the patient table and the straps
Cleaning and disinfecting the receptors
Disinfecting system components
Care and cleaning of floors
Return and disposal
MR System
Packaging
Batteries and accumulators
Appendix: regulatory information
Medical devices of other manufacturers
CE for Physiological Measurement Unit (PMU)
Index
This page has been intentionally left blank.
MAGNETOM Skyra
fit
|
syngo
MR E11
129
Print No. M6-04401.621.02.02.02
1
...
...
127
128
129
130
131
