User's Manual

Button Function
Stop Stops the table movement and the measure-
ment immediately
Reset Stop Resets the table Stop
1 Press the corresponding button.
2 If necessary, adjust the volume using the +/- buttons. Press and
hold the buttons to adjust the volume.
If you hold the button for about one second, the volume increases/
decreases until you release the button.
Automatic voice output can be used for transmission of commands
e.g. breath hold commands.
1 Use the Patient Comfort Configuration dialog box in the software
to initiate automatic voice output: Software Operator Manual
2 On request, adjust the volume in the Patient Comfort
Configuration dialog box to the desired level in the examination
room.
To play music in the examination room, an audio device can be
connected at the intercom.
1 Connect a suitable cable to the audio device and to the connection
at the intercom.
2 Adjust the final volume to the desired level using the control unit
at the magnet or the Patient Comfort Configuration dialog box.
3 Start the music at the audio device.
In-Room syngo Acquisition Workplace
Description
The In-Room syngo Acquisition Workplace (
In-Room syngo Acq WP) is
an additional operating console in the examination room. It is used
for image viewing and MR system operation.
Transmitting automatic voice
output
Transmitting music
3.9
3.9.1
3 MR system components
76
MR System | Operator Manual
Print No. M6-04401.621.02.02.02