User's Manual

The In-Room syngo Acq WP
is connected with the host processor and
facilitates the examination process by allowing the operating
personnel to remain inside the examination room between
procedures.
The In-Room syngo Acq WP is used as follows:
◾ Displaying MR guided procedures
◾ Quickly adjusting patient positioning for survey measurements
◾ Immediately starting the measurement after administering
contrast medium
The constant presence of operating personnel inside the examination
room allows uninterrupted patient care and quick intervention in case
of complications.
The In-Room syngo Acq WP comprises the following components:
(1) LCD monitor
(2) Tray with trackball and keys
(3) Foot switch (optional)
As an alternative, the monitor can be suspended from the ceiling. For
this option, the tray with trackball and keys is not available.
Operating the
In-Room syngo Acquisition Workplace
The In-Room syngo Acquisition Workplace (In-Room syngo Acq WP) is
operated via the trackball and three keys. The same software
functions are available as with the syngo Acquisition Workplace.
3.9.2
MR system components 3
MAGNETOM Skyra
fit
| syngo MR E11
77
Print No. M6-04401.621.02.02.02