User's Manual

Addendum
10 / 12 AXB4-310.621.01.02.02 Addendum
DRAFT
Accessory parts Please note that for some accessory parts, special instructions on cleaning are giv-
en in the corresponding chapters.
If no special reference is given, then the following applies generally:
 Use a lukewarm detergent solution and a soft cloth for slight contamination.
 Remove major contamination first with a cloth soaked in alcohol, then wipe off
with clear water.
 Remove blood spots best of all with cold water.
 Remove contrast medium spots best of all with warm water.
 After using disinfectants, always wipe off with clear water.
Disinfection
To disinfect surfaces we recommend common surface disinfectants based on
aldehyde and/or ampholyteric surfactants.
Caution
Disinfectant sprays
Sprays can seep into the units.
(This can cause damage to electronic components and the formation of flamma-
ble mixtures of air/solution vapor.)
 Use other disinfection methods.
Note The following active ingredient classes can be used:
– Guanidine derivatives
– Peroxide compounds
– Organic acids
The following products should not be used:
–Virex TB
– Terralin
– All alcohol-based products
– All phenol-based products
– All chlorine-releasing products
The safety data sheets of the manufacturer provide detailed information on the
composition of the disinfectants.