User's Manual

Addendum
4 / 12 AXB4-310.621.01.02.02 Addendum
DRAFT
Display area
There are 3 LEDs showing the status of the remote control.
Green LED on: Remote control is on and is in active mode.
Green LED off: Remote control is inactive.
– It is too far away from the table
– The x-ray system is switched off
– The batteries are completely discharged
– The remote control is in “sleep mode”. Press a button swiftly to activate it
again.
Orange LED on: An operation button is being pressed.
LED off: battery sufficiently charged, remote control not connected to the
Charging Station,
LED flashing red: battery needs charging, remaining capacity < 4h.
LED on red: remote control connected to Charging Station and batteries are being
charged.
LED on green: remote control connected to Charging Station and batteries are
fully charged.
This symbol marks an RF transmitting component.
Selection area
In the selection area you can select which part of the system you want to operate.
The green LED on the selected button is on.
Selection of tube unit
Selection of detector
Selection of patient table