User Manual

Alarm management
Effects of BACnet properties on alarm response
9
136 | 353 CM110664en_07
SBT designations BACnet
property
Function blocks (BACnet objects)
Long name Ref. Description Other Binary Analog Multistate
Alarm enable EnAlm Alarm enable Alarm_Enable Pulse Converter
Event Enrollment
I / O / V I / O / V I / O / V
Event enable EnEvt Event enable Event_Enable Pulse Converter
Command Control
1
Power Control
1
AlarmCollection
Trend Logs
Event Enrollment
Loop
I / O / V I / O / V I / O / V
Event detection
enable
EnEvtDet Enable event
detection
Event_Detection
_Enable
Event Enrollment
Event state EvtSta Event state Event_State Discipline I/O
1
Group
1
Pulse Converter
Trend Logs
Device-Info
1
Command Control
1
Power Control
1
AlarmCollection
Event Enrollment
Loop
I / O / V I / O / V I / O / V
Feedback value FbVal Feedback value Feedback_Value O O O
Upper limit HiLm Hi Limit High_Limit Pulse Converter I / O / V
Limit enable EnLm Enable limit Limit_Enable
Lower limit LoLm Low limits Low_Limit Pulse Converter I / O / V
Message text MsgTxt/EvtMs
g
Message text Message_Text Discipline I/O
1
Group
1
Pulse Converter
Command Control
1
Power Control
1
Loop
Event Enrollment
I / O / V I / O / V I / O / V
Deviation
monitoring
period
TiMonDvn Deviation
monitoring
period
Time_Delay Pulse Converter
Power Control
1
Loop
I / O / V I / O / V I / O / V
Switch-off
monitoring time
TiMonOff Switch-off
monitoring time
Time_Delay2 I / O / V
Switch-on
monitoring time
TiMonOn Switch-on
monitoring time
Time_Delay1 I / O / V
Dead band or
dead zone
Nz Neutral zone Deadband Pulse Converter I / O / V
Out of service OoServ Out of order Out_of_Service Device-Info
1
Discipline I/O
1
Group
1
Pulse Converter
Command Control
1
Power Control
1
AlarmCollection
Event Enrollment
Loop
I / O / V I / O / V I / O / V