User Manual

Desigo Control Point
Virtual environment
17
CM110664en_07 219 | 353
17 Desigo Control Point
Desigo Control Point is an embedded building management station for
operating and monitoring building automation and control systems on
BACnet/IP.
Additionally room applications can be operated by the end user (using QMX7
widgets).
The functionality can be adapted to any user profiles – from room users to
facility managers.
Operable systems
● Desigo primary plants
● Desigo room automation
● BACnet third-party devices and systems
Topology
PXM30-1, PXM40-1 and PXM50-1 touch panels
The touch panel clients are used on projects that require multiple touch panels
or third-party devices to operate the same system data. The central web
interface PXG3.Wx00-1 can connect multiple devices.
Use:
● Multiple touch panels on a plant room, conference room, open office
spaces, etc.
● A touch panel in the plant room for on-site operation, remote access via
third-party devices.
PXM30-E, PXM40-E and PXM50-E touch panels
The BACnet/IP touch panels can be connected directly to the BACnet network.
No additional devices are required to operate the Desigo system.
In addition, the BACnet/IP touch panel also includes a web interface for remote
operation using a standard web browser on third-party devices. The
functionality of the web interface essentially matches the functionality of the
PXG3.W100-1, differing only in the permissible system limits. The integrated
web access increases the competitiveness of Desigo on smaller projects since
there are no additional costs and installation effort.
Use:
Touch Panels
BACnet/IP
Standard
Web Browser
PXG3.Wx00-1
PXM50-1PXM50.E
PXM40-1PXM40.E
PXM30-1PXM30.E
PXC Compact PXC Modular PXC3 TX-I/O
DXR2.E..
230 V
DXR2.E..
24 V
TX-I/O