User Manual

Desigo Open
Desigo RXB
21
CM110664en_07 305 | 353
21 Desigo Open
Desigo Open lets you integrate devices and systems from different
manufacturers into the Desigo system. Integration with Desigo Open offers:
● Standardized automated functions, operating and monitoring of the entire
building
● Single-station operation, common view and display. Simplified
multidisciplinary operation, common reporting and common alarm
management.
● Peer-to-peer interaction, communication on the automation level,
automated interactions and data exchange
● Comfort combined with lower energy consumption. New opportunities to
save energy with systems that communicate among themselves. Improved
performance, efficiency evaluation, flexibility and ability to modify system
operation and configuration without re-cabling or new hardware.
● Engineering of integrated solutions in Xworks Plus (XWP)
● Reduced risk thanks to standard solutions. Clear functions that cover the
most important standard protocols.
Third-party devices and systems can be integrated with Desigo on all levels.
Desigo Open System Protocol
Desigo CC SCADA, etc.
PX Open Modbus, KNX/EIB, LonWorks, M-Bus, SCL, etc.
TX Open Modbus, M-Bus, GENIbus, etc.
Room level (Desigo room automation
and RX)
DALI, KNX, EnOcean, LonWorks
L W ON ORKS
System controller
TX-I/O-
Modules
Desigo CC
QAX9..
EnOcean
Room units
PX Open
PXC50/100/200..D
Modular
TX Open
PX KNX
System conroller
PXC001..D
PXC...D
Compact
RXZ97.1/KNX
RS232
RS485
Desigo Control Point
Adapter
BACnet Third-party system
Field and room level Automation level Management level
BACnet/LonTalk or BACnet/IP
Third-party system
KNX S-Mode / EIB or Bus
L W ON ORKS
Third-party system
KNX/EIB
Third-party system
RXB
Room controller
Third-party system
Peer-to-peer communication via BACnet
PXC001..D
Topology
Which protocols does
Desigo support?