User Manual

System overview
Views
3
CM110664en_07 31 | 353
Desigo CC
The application libraries for Desigo CC are delivered as extension modules for
the respective system versions.
For information about compatibility, see
Desigo CC System Description
(A6V10415500).
3.10 Views
There are four views:
● Technical view
● User view
● System view
● Program view
Technical view
The technical view illustrates the technical building services equipment, such
as HVAC systems and associated elements, in the building automation and
control system. The technical view is always present and can be used as a
substitute for the user view if the user does not have his own user designation.
User view
Freely defined and structural user view
The user view is optional in a project. The user view is based on user
designations, e.g.: PL7’FL3’ELE”HEAT.STPT
The structure and syntax of the user designations can be defined for each
specific project and customer. Example of a structure:
Installation/building/room/plant element/signal
User view via the User Designation (UD)
Desigo supports different user views, depending on the application:
In Xworks Plus (XWP) a User Designation (UD) can be entered for function
blocks or compounds in addition to the Technical Designation (TD) and
description. This entry is carried through in the system and can be evaluated by
clients. The UD allows customers to use their own preferred designations for
the plant without changing the technical structure. The UD can be used in the
management platform in addition to the TD. The detailed view in the PXM20
operator units shows the UD as information.
User Designation for Desigo room automation
Storen1
Storen2
Storen3
Storen4
PXM20
Site
Technical View
Technical View
Room
Blinds
protection
BACnet
objects
Technical View
10523Z05en_01