User Manual

System configuration
Devices
22
CM110664en_07 323 | 353
ASN Product description Data points Description
QMX3.P30 Freely configurable operator unit, wall
mounted
1 Fixed count
QMX3.P36 Freely configurable flush-mounted room
unit
3 Fixed count
QMX3.P34 Freely configurable operator unit, wall
mounted
3 Fixed count
QMX3.P37 Freely configurable operator unit, wall
mounted
7 Fixed count
QMX3.P40 Room operator unit without display, with
temperature and humidity sensor
2 Fixed count
QMX3.P70 Freely configurable operator unit, wall
mounted
3 Fixed count
QMX3.P74 Freely configurable operator unit, wall
mounted
5 Fixed count
QMX3.P87 Freely configurable operator unit, wall
mounted (fume hood)
3 Fixed count
QMX3.P88 Freely configurable operator unit, flush-
mounted (fume hood)
3 Fixed count
AQR253…
AQR257…
Flush-mounted room sensor with:
Front module
Base module
1-3 Fixed count, 1 data point per measured
value (optional potential-free, passive NTC
sensors are not counted)
UP220/31 Switch interface 4 Fixed count
UP221/x Single switch 2 Fixed count
UP222/x Double switch 4 Fixed count
UP223/x Triple switch 6 Fixed count
UP287/x Quadruple switch 8 Fixed count
UP258D1x Occupancy, light sensor 2 Fixed count
UP255/D12 Brightness sensor 1 Fixed count
RL260xx 4 x binary input 4 Fixed count
RL512xx 1 x light 16A 1 Fixed count
RL513xx 3 x light 6A 3 Fixed count
RL521xx 2 x blinds 4 Fixed count
RL526D23 Switching/Dimming actuator 2 x AC 230 V,
10 A, 1 … 10 V
2 Fixed count
RS510xx 2 x light 10A 2 Fixed count
RS520xx 1 x blind 2 Fixed count
RS525xx 1 x light universal dim 1 Fixed count
UP285/x 1 x switch 2 Fixed count
UP286/x 2 x switch 4 Fixed count
UP287/x 4 x switch 8 Fixed count
UP510/xx 2 x light 10A 2 Fixed count
UP520/xx 1 x blind 2 Fixed count
UP525/xx 1 x light universal dim 1 Fixed count
N528D01 Universal dimmer, 2 x 300 VA, AC 230 V 2 Fixed count
KNX S-Mode Third-party device Group addresses used are counted
Additional KNX PL-Link limitations: