User Manual

Desigo workflow, tools and programming
Workflow for room automation classic
4
CM110664en_07 45 | 353
● Create project
● Check project in on Branch Office Server (BOS) and define access to
project
● Define project defaults
● Create control cabinet topology (local specification of the automation
station, e.g., control cabinet view)
XWP Hierarchy Viewer and XWP Network Configurator
Create project structure (the building structure is system-oriented):
● Create project structure
● Create building topology (building, building parts, etc.)
● Create system topology (sites)
● Create network topology (XWP Network Configurator, third party devices,
router, computer)
● BACnet references from third party devices and between primary system
and room (demand signals, supervisory)
● ACP (passwords for accessing the automation stations)
XWP Point Configurator
Create systems:
● Define systems (systems, system sections, components, data points)
(solutions, data points, I/O modules)
● Configure the operations (XWP Hierarchy Viewer)
– configure the generic operation
– Configure the project-specific operation (favorites)
CFC & Simulation
Program and configure:
● Program in CFC
● Define points in the I/O Address Editor
● Parameterize in the Parameter Editor
● Define alarming and trending
DNT and DPT
Test and commission:
● Export data to Desigo CC
● Download firmware (upgrade if necessary)
● Load configurations and programs
● Carry out point test
● Debug in CFC (if necessary)
● Create commissioning documentation (local reports)
● Specialties:
– Integration (TX Open Tool, BIM Tool)
– AL Mig (AL Mig Tool)
– Simulation
XWP Report Manager
Create documentation:
● Create project documentation
4.8 Workflow for room automation classic
See Desigo Xworks Plus Overview of Workflows (CM111000).