User Manual

Desigo workflow, tools and programming
Workflow for Desigo room automation
4
46 | 353 CM110664en_07
4.9 Workflow for Desigo room automation
XWP
Create project:
● Create project
● ACP (passwords for accessing the automation stations)
ABT Site > Building
Create project structure (the building structure is room-oriented):
● Create building topology (buildings, floors)
● (Optional) Create user-specific building topology (UD structure)
● Create network topology (define address ranges)
● Create documentation (XWP Report Manager)
ABT Pro and ABT Site > Configuration
Create project library:
● Program automation stations (ABT Pro)
● Create templates for type-based automation stations (ABT Site >
Configuration)
● Create templates for room control units
ABT Site > Building
Create instances in the building:
● Create automation stations, or rooms, based on the project-specific library
per floor
● Edit room parameters
ABT Site > Startup
Commission:
● Configure and load automation stations (node setup)
● Carry out point test (ABT-SSA) (subcontracting)
● Parameterize (ABT-SSA)
All projects are password-protected.
4.10 Desigo Configuration Module (DCM)
Desigo Configuration Module (DCM) lets users, who work in sales or project
execution, design the building automation and control system.
See
Desigo Configuration Module (CM110752).
DCM is automatically updated with the latest data if installed correctly by using
the provided setup program, keeping the suggested installation path, and if an
online/network connection is available. The updated data can also be updated
regionally or dependent on a user to reflect relevant requirements.