User Manual

Desigo workflow, tools and programming
Desigo Automation Building Tool (ABT)
4
52 | 353 CM110664en_07
You can select one or more automation stations for the documentation, per
automation station, plant or system node. You can select document templates
and verify reports in a preview.
Desigo Point Test (DPT)
Desigo Point Test lets you test data points during commissioning of a Desigo
PX automation station. To carry out a data point test with configured I/O
modules, you must download the I/O configuration file for the modular PX
automation stations in the empty PX automation station.
BIM Tool
The BIM Tool is used for TX-I/O modules that are integrated with a BIM on
automation stations. The BIM was used on old automation stations for
integrating I/O modules.
TX Open Tool
The TX Open Tool lets you configure TX Open modules. You can define the TX
Open integration and commission the TX Open modules. To commission TX
Open, load a configuration into the modules with the TX Open Tool.
See TX Open Tool online help (CM111005).
PX KNX Tool (room automation)
See chapter
Room automation .
HVAC Integrated Tool (HIT)
HIT lets you design HVAC plants. HIT lets you to select and document any
HVAC control device as an individual product or in a system configuration.
Using its library of over 300 preconfigured HVAC applications for standard
controllers (Synco™, Sigmagyr™, and RXB) HIT generates a comprehensive
specification including plant diagram, list of material, technical documentation
for each device, and pricing.
4.12 Desigo Automation Building Tool (ABT)
The Desigo Automation Building Tool (ABT) is used for engineering and
commissioning Desigo room automation.
Project data storage in a Desigo project is handled by Xworks Plus (XWP), that
is, you can create a customer project in XWP and check it in to the Branch