User Manual

Part A: System Overview
Features and Benefits: What the System Does
1
10 | 53
Restricted
A6V10415500_en_a_42
vendors available in the electrical market, makes Desigo CC the perfect tool for
maintaining facility operation.
Desigo CC used as management station for systems of the electrical market,
mainly KNX systems, allows users to:
● Graphically operate and monitor the managed systems and take control of
specific equipment
● Edit the scenario settings defined in the macro/reactions or scripts, to adapt
them with the project usage needs
● Create schedules to automate the operation of this systems and set up
exceptions, which override regular schedules
● Compose and configure report definitions to produce a variety of activity and
energy performance reports
● Detect, visualize, and acknowledge/reset faults and alarms
● Collect, visualize, and compare online and offline Trend data
● Interact between different managed systems that belong to different disciplines
of the building and that are connected using different protocols.
● Open for extension with other 3rd party products like Hotel Management
Systems
● Easy and quick import of hierarchy and configuration configured in ETS
1.1.1.4 Management Station for multiple disciplines
As an integration platform, Desigo CC is designed for the simultaneous connection
to multiple systems and use by multiple operators, each with their unique focus.
Desigo CC ensures the optimal system performance of building automation and
danger management applications.
The workflow-oriented user interface provides the same look, feel and operation to
all connected subsystems. This brings integration to the next level, a unification
where tasks such as commanding, event handling, reporting, and scheduling are
not differentiated by the subsystem.
The combined control and management of building automation and danger
management disciplines on a single management system allow for interaction
between those facilities.
Interaction examples:
● Unauthorized entry detected by the Intrusion system, initiates lighting and
focuses the camera to the location.
● Deteriorating weather conditions, like a storm, cause sending a centralized
command to the room systems, opening all blinds, and informing about window
contact status.
● After successful access control authentication, access to the room is granted,
Lights are activated, and HVAC systems switched to occupied mode.
● Temporary noxious emissions, for example, from helicopter landing or vehicles
at a loading dock, cause outside air dampers to close, stopping fresh air intake.
● Scheduled activation for entire building modes (for example, night mode sets
lights off, blinds and HVAC plants to unoccupied mode, perimeter security,
camera positions, lifts to base position).
● Under peak energy consumption conditions, inform the user and offer assisted
procedure to optimize building equipment.
● Built-in applications for vertical transportation systems manufactured by
Schindler Ltd. (for example, monitor elevator status, call a lift, treat passenger
alarms and faults, lifts and escalator dynamic visualization).
1.1.2 Highlights
Desigo CC has been designed to be: