User Manual

Part B: System Dimensioning
Hardware Category Definitions
2
32 | 53
Restricted
A6V10415500_en_a_42
The recommendations provided here are based on tests executed on hardware
products available at the time of the release of the current version of Desigo CC.
Compatibility and performance using other software and hardware that might
become current at some future point cannot be guaranteed. In such cases, please
contact your local support for further information.
Standard hardware configurations defined above are available to Siemens RSS /
BP organizations. Please contact your local procurement manager for further
information.
With Video integration:
Minimum recommended machine for clients or servers is MS
A dedicated graphic card with 6GB RAM
For further information regarding hardware specifications, especially for
virtualization or recording scenarios, please refer to the specifications of the VMS
vendors.
Consequences
UL/ULC Compliance
For UL/ULC compliance, all computers in the system (Server, Clients and FEP)
must be UL864 listed (Comark computer). Refer to section --- MISSING LINK ---
for UL/ULC computer information.
Carefully read section --- MISSING LINK --- to learn about the specific hardware
requirements in case of distributed systems.
For system being part of a distributed topology, please carefully read Distributed
System Configurations [➙ 37].
Installation on an embedded PC is only supported for Desigo CC Compact
products as well as Desigo CC Connect. These are the minimum hardware
specifications:
Hardware Type
Embedded PC
Category Name
EP
Limit System Objects
10,000
Processor
Celeron N2930 or equivalent
>= 1.83GHz
4 cores
RAM
8GB
Hard disk
1 x 64GB SSD
Network card
Gigabit speed
In case of installation of an embedded PC, SQL Server needs to be configured to
limit the amount of RAM taken from the system to 1GB RAM