User Manual

Part C: System Compatibility
Supported Subsystems and Standard Field Network Protocols Compatibility
3
48 | 53
Restricted
A6V10415500_en_a_42
● QMX3 Sensors: QMX3.P30, QMX3.P4, QMX3.P70
● QMX3 Room Operator units: QMX3.P02, QMX3.P34, QMX3.P37, QMX3.P74
Other KNX devices:
Any KNX s-mode compatible device can be integrated in Desigo CC via IP using
KNX base libraries
3.2.7 Standard Protocols
● BACnet: Building Automation Control network, Revision 1.15
● OPC Client: OLE for Process Control OPC DA 2.05, 3.0
● ONVIF: Standard for IP video camera systems by Siveillance Video
● Modbus TCP: Modbus IP communication protocol
● SNMP: SNMP Agents monitoring (V1 and V2)
● IEC 61850: protocol for electrical substations and devices
● KNX: S-mode KNX IP integration via KNX IP Router or IP Interface
● M-Bus: M-Bus over IP though M-BUS Ethernet GW for heat, water and
electrical meters.
Notification Protocols and Devices
● Email: POP3/IMAP/SMTP with SSL/TSL
● Pager: ESPA 4.4.4; Ascom
● Mobile: SMS
● 3G GSM Modem:
– EHS6T USB modem from Gemalto
– HT63E, HT910E and HT910G modems from Telic
● 2G GSM Modem:
– Siemens TC35i
– Siemens MC35i
– Cinterion MC52iT
– BGS5T, BGS2T and CT63 E modems from Gemalto
– GT864E modem from Telic