User Manual

4
Siemens CM1N9204en
Smart Infrastructure 2020-03-17
Bulk packages (18 pieces)
Type Stock number Applications Inputs Outputs
DXR2.E09-101A/BP S55376-C165 Fan coil, radiant ceiling, radiator,
4 luminaires & 2 blinds
1 DI, 2 UI 3 relays, 3 AO
DXR2.E09T-
101A/BP
S55376-C166 4 triac, 1 AO,
1 relay
DXR2.E10-101A/BP S55376-C164 4 triac, 3
relays
Accessories
Type Stock number Designation
DXA.H110 S55376-C119 Terminal cover for DXR.. 110 mm, 2 pieces
Product documentation
Topic Title Document ID:
Engineering, mounting and installation Desigo
TM
Room Automation CM111043
Engineering and commissioning,
workflow
ABT online help n/a
Commissioning Desigo Raumautomation - Setup and Service
Assistant
CM111050
Product environmental declaration Product environmental declaration 230 V CM1E9204
Product environmental declaration Product environmental declaration 24 V CM1E9205
Related documents such as the environmental declarations, CE declarations, etc., can be
downloaded from the following Internet address:
https://siemens.com/bt/download
Notes
Safety
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
●
Observe national provisions and comply with the appropriate saf
ety regulations.
Engineering
Identification
Each device has a unique serial number to ensure efficient commissioning. It is provided on
the adhesive barcode label. The serial number can be read directly into the engineering tool
using a barcode reader.
Wiring
Wiring must be sufficiently insulated to the available rated voltage. Sizing and fusing of the
wiring depends on the connected load.
The looped supply (230 V) is interrupted when plug 51-54 is disconnected from the device.
Bridges 51-53 and 52-54 are located on the PCB, not the plug.