User Manual

45 / 48
Siemens Desigo Touch and Web CM111028en_03
Building Technologies Good to know – Indicators 2015-03-31
3.3 Indicators
Indicators display certain states. Indicators are used for:
· Operating modes
· Alarm states
· Transitions.
Normal Critical protection
Overridden On/Off delay
Out of service Manual switch
Danger
Alarm not yet acknowledged.
Alarm in Offnormal or Fault state.
Fault acknowledged but not cleared.
The fault must be cleared locally.
Fault cleared but alarm not yet acknowledged.
Alarm in Normal state.
Fault cleared and acknowledged, but alarm not yet reset.
(Appears only with Extended alarms.)
Reset alarm.
No alarm—no action
Normal
Transition (outputs only)
Operating state indica-
tors
Alarm indicators
Transition indicators