User Manual

7 / 16

QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_08

Siemens Smart Infrastructure 2020-04-03

Sample icons are available in the label

template M1602.1

Information. e.g. on room operator unit

location or on room type (free text)

· For KNX PL-Link wiring (topology, allowed cables and cable length), see the

Desigo TRA installation guide, CM111043.

· Use the correct cables for the KNX PL-Link bus

· Do not interchange the wires of the KNX PL-Link cable.

– The red terminal is for KNX PL-Link +

– The gray terminal is for KNX PL-Link –

· For KNX S-mode follow the KNX regulations

· Observe all local installation regulations.

Caution!

The devices are not protected against accidental connection to AC 230 V.

Labels for QMX3.P02,

QMX3.P37

Insert label

Remove label

Installation

602J109

602J110