User Manual

9 / 14
A6V10725318_en--_k Siemens
2019-08-28 Smart Infrastructure
KNX Group Objects
Nr. Name in ETS Object
function
Flags Data point type KNX Range
C R W T U ID DPT_Name Format Unit
1 Fault information Transmit 1 1 0 1 0 219.001 _AlarmInfo 6 Byte --- [0...255 ] = Log Nr.
[0...2] = Alarm priority
[0...14] = Application area
[0...4] = Error class
[0...7] = Attributes
[0...7] = Alarm status
2 Fault state Transmit 1 1 0 1 0 1.005 _Alarm 1 bit --- 0 = No alarm
1 = Alarm
3 Fault transmission Receive 1 0 1 0 1 1.003 _Enable 1 bit --- 0 = Disable
1 = Enable
4
Setpoint position /
Setpoint pos. heating
1)
Receive 1 1 1 0 1 5.001 _Scaling 1 Byte % 0..100%
5 Actual position /
Actual position heating
1)
Transmit 1 1 0 1 0 5.001 _Scaling 1 Byte % 0..100%
6 Setpoint pos. cooling
1)
Receive 1 1 1 0 1 5.001 _Scaling 1 Byte % 0..100%
7 Actual position cooling
1)
Transmit 1 1 0 1 0 5.001 _Scaling 1 Byte % 0..100%
8 Fault Transmit 1 1 0 1 0 1.005 _Alarm 1 bit --- 0 = No alarm
1 = Alarm
9 Override position 1 Receive 1 1 1 0 1 1.003 _Enable 1 bit --- 0 = Disable
1 = Enable
10 Override position 2 Receive 1 1 1 0 1 1.003 _Enable 1 bit --- 0 = Disable
1 = Enable
1)
For operating mode “heating / cooling control”