User Manual

69 / 86

Siemens Desigo Desigo Room automation - Engineering, mounting and installation CM111043en_13

Smart Infrastrructure EnOcean RF networks 2020-04-30

Interoperability · RF protocol is defined and integrated in the modules.

· Sensor profiles are established and followed by users.

· Unique transmission ID (32 bit).

Coexistence with other

RF systems

· No interference with DECT, WLAN, PMR systems, etc.

· System design verified in an industrial environment.

· Renovation projects (old buildings, museums, churches, historical buildings,

etc.).

· Rooms where wall reworking is difficult or even impossible (sandstone, glass,

metal)

· Spaces requiring adjustable room division (open plan offices, museums, TV

studios)

· Rooms with flexible furnishing or frequently changing decor

· System extensions

Switches, sensors and actuators in building technology.

Wireless range in building is ca. 30 m.

For operation with a control unit, the connection to the gateway must first be set

up. See data sheet N1661 (Gateway EnOcean/LonWorks) or N1662 (Gateway

EnOcean/KNX).

Typical application

(example with additional third-party components)

light

Switch

Temperature monitoring

Valve.

Motion detector

Window contact

Heating

Blinds

Data telegrams from EnOcean devices are received by the receiver (e.g. EnOcean

/ KNX Gateway) and forwarded as communications objects to the control unit.

This type of cooperation requires that the receiver "trained" the sender. See data

sheet N1662 (Gateway EnOcean/KNX).

Current room device data are sent only every ca. 15 minutes to consume as little

energy as possible. However, this signal, a so-called presence signal, is always

Specially suited for

Function