Data Sheet for Product

Submittal Sheet 599 Series 3-Way Ball Valves
Document No. 154-045
May 28, 2020
Page 2 Siemens Industry, Inc.
Typical Specifications
Ball valves shall have female NPT type fittings and shall
be 1/2 to 2-inch (15 to 50-mm) line and ball sizes. The
valves shall have a forged brass body, chrome-plated
brass or 316 stainless steel ball, and EPDM O-ring
seals. Valves may contain a glass-filled polymer flow
optimizer to provide an equal percentage control
characteristic. This flow optimizer should be an integral
part of the ball assembly. Ball valves shall utilize a 90-
degree rotation for control. They shall provide
automated flow control of hot or chilled water and up to
50% glycol solution for HVAC control applications.
Technical Data
Valve Body Rating ANSI 250/600 WOG
Static Pressure 360 psi (2482 kPa)
Maximum Operating 60 psi (414 kPa) for 1/2" to 1-1/2" valves
Differential Pressure 35 psi (345 kPa) for 2" valves
Controlled Media Water, glycol solutions to 50%
Media Temperature
1/2-inch to 1-1/4 inch 35°F to 250°F (2°C to 121°C)
1-1/2 inch and 2-inch 35°F to 230°F (2°C to 110°C)
Body Forged Brass ASTM B283
Flow Optimizer Glass-filled polymer
Ball Chrome-plated brass or 316 stainless
steel
Stem Brass or 316 stainless steel
Ball Seals Reinforced PTFE seals with
EPDM O-rings
Stem Seals EPDM O-rings
Angle of Rotation 0 to 90°
Table 2. Product Numbers for Fail-Safe Assemblies.
Valve
Body
Product
Number *
Valve
Size
Inches
(mm)
Close-Off
∆P in psi
(kPa)
Flow Rate
Cv
(Kvs)
Fail-Safe
Control & Actuator Prefix Code
2-Position,
GMA121.1P
171E
3-Position,
GMA131.1P
171F
0 to 10 Vdc,
GMA161.1P
171G
599-10350(S)
1/2 (15)
200 (1379)
0.4 (0.34)
171E-10350(S)
171F-10350(S)
171G-10350(S)
599-10351(S)
0.63 (0.54)
171E-10351(S)
171F-10351(S)
171G-10351(S)
599-10352(S)
1.0 (0.86)
171E-10352(S)
171F-10352(S)
171G-10352(S)
599-10353(S)
1.6 (1.4)
171E-10353(S)
171F-10353(S)
171G-10353(S)
599-10354(S)
2.5 (2.2)
171E-10354(S)
171F-10354(S)
171G-10354(S)
599-10355(S)
4 (3.5)
171E-10355(S)
171F-10355(S)
171G-10355(S)
599-10356(S)
6.3 (5.5)
171E-10356(S)
171F-10356(S)
171G-10356(S)
599-10357(S)*
10 (8.6)
171E-10357(S)*
171F-10357(S)*
171G-10357(S)*
599-10358(S)
3/4 (20)
200 (1379)
6.3 (5.5)
171E-10358(S)
171F-10358(S)
171G-10358(S)
599-10359(S)
10 (8.6)
171E-10359(S)
171F-10359(S)
171G-10359(S)
599-10360(S)*
16 (14)
171E-10360(S)*
171F-10360(S)*
171G-10360(S)*
599-10361(S)
1 (25)
200 (1379)
10 (8.6)
171E-10361(S)
171F-10361(S)
171G-10361(S)
599-10362(S)
16 (14)
171E-10362(S)
171F-10362(S)
171G-10362(S)
599-10363(S)*
25 (22)
171E-10363(S)*
171F-10363(S)*
171G-10363(S)*
599-10364(S)
1-1/4 (32)
200 (1379)
16 (14)
171E-10364(S)
171F-10364(S)
171G-10364(S)
599-10365(S)
25 (22)
171E-10365(S)
171F-10365(S)
171G-10365S)
599-10366(S)*
40 (35)
171E-10366(S)*
171F-10366(S)*
171G-10366(S)*
599-10367(S)
1-1/2 (40)
200 (1379)
25 (22)
171E-10367(S)
171F-10367(S)
171G-10367(S)
599-10368(S)
40 (35)
171E-10368(S)
171F-10368(S)
171G-10368(S)
599-10369(S)*
63 (54)
171E-10369(S)*
171F-10369(S)*
171G-10369(S)*
599-10370(S)
2 (50)
200 (1379)
40 (35)
171E-10370(S)
171F-10370(S)
171G-10370(S)
599-10371(S)
63 (54)
171E-10371(S)
171F-10371(S)
171G-10371(S)
599-10372(S)*
100 (86)
171E-10372(S)*
171F-10372(S)*
171G-10372(S)*
* Denotes a full-port valve without flow optimizer insert.
S – Suffix denotes stainless steel ball and stem
NOTE: Maximum operating differential pressure = 60 psi for 1/2" to 1-1/2"; 35 psi for 2".