Data Sheet for Product

Technical Instructions OpenAir™ Non-Spring Return, 24 Vac, Floating Control, Rotary Electric Damper Actuator
Document No. 155-188P25
May 22, 2014
Page 10 Siemens Industry, Inc.
Wiring, Continued
TPost Header AMP, ContinuedT
GDE131.1N
Daisy Chain
The input cable (purchased separately) brings power and a control signal to the first
actuator in a daisy chain configuration.
Table 3.
Floating Control Input Cables
985-131
3 ft
12 pk
985-132
3 ft Siemens TEC
12 pk
CAUTIONS:
Insert the plug into the Post Header AMP from the left to prevent
damage to the cable wires. See
XFigure 21X.
1. The open bracket (See
XFigure 21X), to the right of the
actuator, is used for strain relief of the customer purchased
daisy chain cable (See Required Tools).
2. Secure the cable to the actuator bracket with a cable tie.
(See
XFigure 22X.)
Figure 22.
Always Install the Cable Plug from
the Left.
Figure 23. Input Cable Installed in Bottom
Three Contacts.
NOTE:
You must select either
the top 3 contacts or
the bottom 3 contacts.