Data Sheet for Product
TH 192 S Single Temperature Room Thermostat Technical Instructions
Document Number 155-065P25
February 7, 2022
Siemens Industry, Inc. Page 11
Service Parts
The following chart lists accessory parts and tools available for thermostat service.
Table 4. Service Parts.
Description
Part Number
Dial thermometer (-40 to 140F, -40 to 60C) with pocket case
141-0573
Basic pneumatic calibration kit with thermometer, gauge, squeeze
bulb, fittings, and case
832-177
Test head kit
832-179
Calibration tools
832-178
Test probe to check pressure with cover on
Needle probe with 1-1/2” diameter gauge 0-30 psig
(0-200 kPa) and calibration/cover wrench
192-633
Needle probe, no gauge (package of five)
192-759
1-1/2” diameter gauge , 0-200 kPa,
back connected 1/8” NPT male
142-0344
1-1/2” diameter compound gauge, 0-30 psig/0-200 kPa,
back connected 1/8” NPT male
142-0373
1-1/2” diameter compound gauge, 0-30 psig/0-200 kPa,
bottom connected 1/8” NPT male.
Replacement for use with 192-633
142-0426
Chassis tube connector replacement kit with mounting screws
(material for 10 thermostats included)
192-525
Restrictor plate replacement kit with filters and gasket
(material for 10 thermostats included)
192-321
Plug-in adapters for quick thermostat removal
Straight, blue (package of 20)
192-485
Straight, white (package of 20)
192-486
Air link connects adapters for pressure tests (package of 20)
192-501
Compression ring (package of 100)
141-388
Elbow (provides quick return for wall surface mounting), blue
(package of 20)
192-487
Elbow (provides quick return for wall surface mounting), white
(package of 20)
192-488
20 scim (5.4 ml/sec) restrictors for 1-pipe systems (package of 5).
(1/4 “, 6.4 mm, OD plastic barb unless noted.)
Brass coupling, 1/8” NPT (1 only).
184-040
Coupling
184-116
Tee
184-113
Pre-piped dual tee for dual 1-pipe systems
184-130