Assortment / System Description

ManualsBrandsSiemens ManualsHeating SuppliesHeat (DA) 20 psi / Cool (RA) 15 psi Thermostat Retrofit Chassis (Beige)

Powers

Controls CP 567 Control Cabinets

567 Series Control Cabinet Assemblies 3.5-inch Depth

These cabinets provide a convenient central location for equipment such as power metering,

small electronic controls and accessories.

These 12” H × 14” W × 3.5” D cabinets provide a smaller profile for the mounting and protection

of small electronic controls or power metering devices. A convenient “windowed door” model is

available to allow external viewing of internal controls and displays without opening the door.

Part Numbers: 567-551, 567-556

Technical Instructions

567 Series Control Cabinet Assemblies 6-inch Depth

These cabinets provide a convenient central location for equipment such as BAS electronic

controls, metering devices and small pneumatic equipment.

The empty cabinet box can be installed at the job to permit early rough-in of conduit. Since the

door and subpanel can be separated from the cabinet, controls may be mounted to the door

subpanel either at the job site or at the field office and connected to the cabinet at your

convenience.

Part Numbers: 567-351, 567-452, 567-453, 567-454

Technical Instructions

567 Series Control Cabinet Assemblies 9-inch Depth

These cabinets provide a convenient central location for equipment such as DDC and/or

pneumatic systems using either copper or polyethylene tubing or with wired electric/electronic

systems. The 9-inch nominal cabinet depth provides extra room for large items.

The empty cabinet box may be installed at the job to permit early rough-in of conduit. Since the

door and subpanel can be separated from the cabinet, controls may be mounted to the door

subpanel either at the job site or at the field office and connected to the cabinet at your

convenience.

Part Numbers: 567-352, 567-353

Technical Instructions

567 Series Control Cabinet Components Cabinet Enclosure Only

These cabinets provide a convenient central location for equipment such as DDC and/or

pneumatic systems using either copper or polyethylene tubing or with wired electric/electronic

systems.

The empty panel can be installed at the job to permit early rough-in of conduit. Since the door

and subpanel can be separated from the cabinet, controls may be mounted to the door

subpanel either at the job site or at the field office and connected to the cabinet at your

convenience.

Part Numbers: 567-371, 567-372, 567-373,

Technical Instructions

567 Series Control Cabinet Components Cabinet Doors Only

These replacement doors provide the 567 control panel assembly a long operational life as

doors can be replaced to support new door mounted equipment requirements or to replace

previously punched doors.

The empty panel enclosure box can be installed at the job to permit early rough-in of conduit.

Since these doors can be separated from the cabinet, controls may be mounted to the door

subpanel either at the job site or at the field office and connected to the cabinet at your

convenience.

Part Numbers: 567-361, 567-362, 567-363

Technical Instructions