User Guide

244
syngo 3D
Defining Output Types
You can change the output type for a segment at any
time, i.e., from Multi Planar Reconstruction (MPR) to
Maximum Intensity Projection (MIP), to Shaded Sur
-
face Display (SSD), or to Volume Rendering Technique
(VRT).
Depending on your working method, you will first gen-
erate a reference image, for example, in MPR in the
desired view and then switch to MIP, SSD or VRT dis-
play.
• Click on the segment for which you want to change
the output type.
• If you want to switch over all segments, you must
select and switch over each one separately, one after
the other.
Creating Series
This application gives you the ability to easily create
new images or even image series, e.g., for fast display
of interesting anatomical structures
• With any slice thickness (at least the reconstructed
slice thickness)
• Variable distance/angle between the images
• Selectable number of images
• Selectable range of reconstruction
• Different output types
Parallel Ranges
With this option you generate series of cut images that
are parallel to one another and perpendicular to the
reference image for the output types MPR, MPR Thick,
MIP Thin and VRT Thin.
For example, for MPRs or MIP Thin through a process in
the lung or abdomen.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 244 Friday, April 8, 2005 9:55 AM