User Guide

290
syngo Volume Evaluation
Prerequisites
The images must fulfill the following conditions:
• Only images of one patient must be loaded for eval-
uation with Volume.
• The scans must have been acquired with the same
table height and the same gantry tilt.
• Only image data sets with the same slice orientation
must be used; (the selection should not include a
topogram image).
• The loaded images must have the same zoom factor
and the same reconstruction center.
• At least four images must be loaded before volume
evaluation can be performed.
• The time range between the first and the last image
must not exceed one hour.
• The data capacity of the volume must not exceed
1024 images with matrix dimensions of
512
x 512 pixels.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 290 Friday, April 8, 2005 9:55 AM