bk_front.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- s The cordless digital DECT telephone system expandable to 6 handsets Operating instructions Please read the safety precautions outlined in these operating instructions before putting the equipment into service ACHTUNG! Schnittkante ggf. auf Titelseite U1 nach außen versetzen wg. Falz-Ausklappseite Gigaset 2011 Comfort 17.7.
kap00.fm5 17.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Gigaset® 2011 Your guide to this manual Putting the telephone into service (➔ page 1). Conducting a call (➔ page 17). The first telephone call Registering new handsets at the base station (➔ page 69). Making internal calls (➔ page 25). Holding internal consultation calls during an external calls and transferring external calls to internal extensions (➔ page 27).
kap00.fm5 17.7.
kap00.fm5 17.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Overview: keys Base station keys ? Green paging key for calling all registered handsets and for registering handsets. Display keys assignments W d Activates additional menu Selects call number from the directory INT Sets up internal connection z Redials one of the five last numbers dialled Z or Y > or < OK { GO BACK X SET COLL.
kap00.fm5 17.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Overview: keys ux . Menu-dependent keys (display keys) Menu key 1 - @, : and # Dialling keys for call numbers and input keys for procedures and entering characters ("s" = blank, ".
kap00.fm5 17.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Overview: display symbols Operating actions and statuses are graphically displayed on the Gigaset 2000C handset.
kap01.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Safety precautions Only use approved nickel-cadmium (NiCd) batteries or nickelmetalhydride batteries (NiMH)! (➔ page 86). Never use other batteries or ordinary (non-rechargeable) batteries.These can short circuit or destroy the battery unit (dangerous). The following labels are found on the battery compartments of the handset and charging unit: B 18.7.99 + _ Only use rechargeable batteries with the poles aligned as shown.
kap01.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Approval and conformity Your Gigaset 2010 has been certified by the "British Approvals Board for Telecommunications", the British office for telecommunications certification. It has been approved according to EU guideline 91/263/EWG (CTR6, CTR10) for telecommunications terminals. Anyone is permitted to connect this telephone to a telephone socket and use it at the Public Telecommunications Network in the UK.
17.7.99 giga2011.IVZ Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Contents Overview: keys ............................................................................................................................... V Overview: display symbols .............................................................................................................VI Step by step guide to putting into service ................................................................................
giga2011.IVZ 17.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Contents Input function ............................................................................................................................. 37 Entering names and numbers ...................................................................................................... 37 Entering letters, special characters, and digits .............................................................................
17.7.99 giga2011.IVZ Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Contents Short cuts ................................................................................................................................... 77 Descriptions with example ........................................................................................................... 77 Short cut menu ............................................................................................................................
18.7.99 kap02.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Step by step guide to putting into service Step by step guide to putting into service The Gigaset 2011 base station must be connected before you can put the handset into service. Please follow the step-by-step instructions for putting the handset into service. Step 1: Observe the safety precautions Please read the safety precautions outlined in these operating instructions before putting the equipment into service.
kap02.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Step by step guide to putting into service Step 3: Connect the base station Power cord Telephone cord Underside of base station housing Telephone cord Insert the Mini-Western plug on your telephone cord into the base station. The jack on the underside of the base station is identified by the following symbol: Insert the plug on your telephone cord into the telephone socket.
18.7.99 kap02.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Step by step guide to putting into service Step 4: Insert the batteries into the handset The handset is powered by two batteries. Battery compartment cover Battery compartment with batteries Hold the handset with the keypad facing downwards. Insert the batteries into the battery compartment. Make sure that the +/– battery poles are aligned correctly.
kap02.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Step by step guide to putting into service Step 6: Check the signalling method Telecom telephone lines can operate with the following signalling methods: ● Dial pulsing (DP) ● Dual-tone multifrequency signalling (DTMF) Your Gigaset 2011 is set to DTMF signalling by default. Checking your own telephone’s signalling method c Press the Talk key. You will hear the dial tone (on-hook signal). o Press any digit, e.g. 2.
kap03a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Menu-driven operation Menu-driven operation Press the . key to activate the local menu of the enhanced Gigaset 2000C handset (off-line). Handset Lock Short Cut Baby Alarm YWEITER Z { OK . The first menu level appears when the menu has been activated with .. Three lines of available menu items are shown in the display. The first menu item is highlighted. This menu item is selected. Use Z to scroll down to the next menu item.
kap03a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Menu-driven operation Moving to higher menu levels and exiting a menu When your are in the top menu level, you can exit the menu by pressing .. If you are at a lower menu level, you can move up one level by pressing { without saving any settings made. When you reach the end of a menu (indicated by a broken line) the { and OK keys merge and become the GO BACK ,key. Press this key to exit the menu level.
kap03a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Menu-driven operation Displays in the operating instructions The selection of a function in one of the menus or submenus is depicted using symbols. The following inputs, for example, must be made to deactivate the confirmation beep: u u u u x Z Z Z Z ON / OFF x x x x x x . Press the menu key. OK Scroll to Settings and confirm. OK Scroll to Handset Settings and confirm. OK Scroll to Beeps and confirm.
kap03a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Menu-driven operation On-line menu Once you have seized a line (c key), an on-line menu is displayed when you press .. You can select the following menu items: Menu Select Services Directory Internal Call Short Cut Switch to Tone Handset Volume Service Display keys assignment is controlled by the base station in on-line mode. Dual key assignment is deactivated during a call.
kap03a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Menu-driven operation Principal menus If an arrow in the diagram points directly to a menu or a function with a name, you can select this item by ● pressing OK or ● automatically by entering a character Menus or functions that contains the character W in the header can be reached by pressing W . Press . to select.
kap03a.fm5 18.7.
18.7.99 kap04.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Operating modes Operating modes On/off/protected mode You can switch your handset ● to protected mode, ● off, ● and on (again). When the handset is in protected mode, it is protected against inadvertent use. The handset switches on automatically to receive incoming calls. If you want to make an outgoing call, you will have to switch the handset on first. When the handset is switched off, incoming calls are not signalled.
kap04.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Operating modes Switching on the handset When the handset is in protected mode: h Press the handset button briefly. You will hear the positive confirmation beep. The following message appears on the display when the handset is switched on: : U Base 1 Handset vol. INT z d When the handset is switched off: h Press the handset button briefly. You will hear the positive confirmation beep. The symbol \ flashes on the display.
kap04.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Operating modes Signalling method Telecom telephone lines can operate with the following signalling methods: ● Dial pulsing (DP) ● Dual-tone multifrequency signalling (DTMF) Your Gigaset 2011 is set to DTMF signalling by default. If your telephone line is connected to a digital switch, you can use both dial pulsing and DTMF signalling. In this case, leave the default DTMF setting or reset it, for example, after relocating your handset.
kap05.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Incoming calls Incoming calls Call number display An incoming call is indicated by the ringer (bell symbol) and appears on the display. If the network carrier supports call number display (CLIP), the external caller’s number is shown on your handset display.
kap05.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Incoming calls ● Internal call The following example shows a call from mobile unit 2. : Internal call 2 RING OFF Accepting calls Calls can be accepted as long as the call symbol is displayed. u RNG OFF You can switch off the ring tone. When the handset is in the base station or charging unit: Remove the handset from the charging unit. You are connected.
kap05.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Incoming calls External call-waiting during internal calls The call waiting beep signals an external call while an internal call is in progress. Your internal connection is cleared down if you accept the external call. The external call is signalled on the display: : EXTERN INTERN 2 x ACCEPT ACCEPT You accept the external call immediately. or a Disconnect the internal call. You will hear the ring tone.
kap06.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- External outgoing calls External outgoing calls Calling external parties c o Press the Talk key. You will hear the on-hook signal. Enter the required call number using the dialling keypad. The number you have entered is shown on the display, e.g.: EXTERN 0043123456 INT ° PAUSE You will hear the ring tone. Suffix dialling If you have dialled the call number of a switch, for example, you can now suffix-dial an extension manually.
kap06.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- External outgoing calls Manually inserting a pause If you repeatedly get the busy signal after entering the country code, for example, when dialling en-bloc, insert a pause (3 seconds) between the country code and the call number: u (t means: scroll with u Z, confirm with x OK ) W t Pause The pause "P" appears on the display.
kap06.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- External outgoing calls Redial Repeating the last number dialled x c REDIAL Press the Talk key. Press the Redial key: the last number called is redialled. Repeating one of the last five call numbers You can call up a list of numbers for redial by pressing z . You will be presented with a list of the last five different numbers you called, including numbers which were dialled from the directory. u Z c Select the desired call number.
kap06.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- External outgoing calls c Press the Talk key within 30 seconds. The call number is dialled. You will hear the ring tone. or x W t Dial Number (t means: scroll with u Z, confirm with x OK ) The number is dialled. You can quit the additional menu without dialling by pressing { . Dialling from the call list If a call attempt is unsuccessful, e.g.
kap06.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- External outgoing calls Activating the call list The left LED on the base station blinks and the° icon appears on the handset display when "unanswered" calls are entered. To check the call list or initiate a callback, proceed as follows: u° Press the display key to activate the call list. Base 1 d° c u° If there are no more "unanswered" calls in the list, seize the line first and then activate the call list with the display key.
kap06.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- External outgoing calls Deleting a callback party from the call list u x Z X Search for a callback party Delete an entry from the list. A callback number is not incorporated in the redial list. Call list in the Gigaset 2000S/1000C handset Activating the call list New calls are only signalled at the base station. Gigaset 2000S c B#3 Press the Talk key. Activate the call list. The call number of the last caller is displayed.
18.7.99 kap06.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- External outgoing calls Deleting a callback party from the call list Display after activating the call list. 089722244667 P f N b F * Change to the second display line of the entry. In this example, there were three calls to this number and one callback attempt. # Search for a call number in the list. 0 u3 P f N b F Delete the entry.
kap06.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- External outgoing calls Ending a call Replace the handset in the charging unit. The line is cleared down. or a 24 Clear down the connection.
18.7.99 kap07.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Collective ringing and internal calls Collective ringing and internal calls Making collective calls to all handsets from the base station It can be useful to make a collective call from the base station, for example, to locate mislaid handsets. It is not possible to make internal calls during a collective call from the base station. It is also possible to make collective calls from the base station if you only have one handset.
kap07.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Collective ringing and internal calls Checking your own internal number x INT Initiate the connection. The internal call number of the handset is displayed. INTERN 2 SET COLL.CALL Ending an internal call Replace the handset in the base station or charging unit. The line is disconnected. or a 26 Clear down the connection.
kap08.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Internal consultation calls and transferring calls Internal consultation calls and transferring calls During a external call it is possible to: ● hold a consultation call with an internal party, ● transfer the external call to the internal party. Consultation calls and call transfer are only possible if ● more than one handset is in operation (➔ page 71).
kap08.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Internal consultation calls and transferring calls Transferring calls When more than one handset is in operation If more than one handset is in operation it is possible to transfer an external call to an internal party (➔ page 71). u INT o Set up a connection. Enter the number of the handset to which you want to transfer the call (1 to 6). You will hear the internal ring tone. The handset is called. The external call is put on hold.
18.7.99 kap08.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Internal consultation calls and transferring calls Allowing internal parties to listen in on a call An internal party can be allowed to listen in on a call with an external party with his/her handset. Prerequisite: an external connection has been set up. c u INT o x LIST.ON An external connection has been set up. Set up a connection . ( Dial the internal party (1... 6). The external all is put on hold. The internal party answers.
kap08a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Creating and managing the directory Creating and managing the directory You can store up to 100 entries in the electronic directory. The entries comprise: ● call numbers (maximum 32 digits), and ● names (maximum 16 characters). When you activate the directory, the names are presented in alphabetical order. You can scroll through it at your ease and dial directly from it (➔ page 19).
kap08a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Creating and managing the directory Entering/copying/editing/deleting call numbers/names New Entry To add a new entry to the directory, select New Entry in the directory menu. u d u (t means: scroll with u Z, confirm with x OK ) W t New Entry When you select New Entry, the input function is active. The name and number are entered as described in the chapter “Input function“ ➔ page 37. The names are sorted in alphabetical order.
kap08a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Creating and managing the directory Displaying a special character You can display the meaning of any special character in the call number, e.g. "P". Place the cursor on the character: u W t Show Function The explanation is shown on the display: Digit “P“: Pause. Checking an entry To prevent an entry appearing in the directory more than once, it is possible to have new entries checked.
kap08a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Creating and managing the directory Processing and saving an entry The options available under New Entry are also available in the additional menu. Entries in the directory can be selected using the search function. Enter the first letter of the name. The first entry starting with this letter is displayed. It is not possible to add new entries if the directory is full. You must first delete an existing entry.
kap08a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Creating and managing the directory Available memory It is possible to show the percentage of memory available for your entries. u (t means: scroll with u Z, confirm with x OK ) d x W t Available Memory The message "Memory: 70% available", for example, is displayed for approximately two seconds. Copying an entry/directory Directory entries can be copied between enhanced Gigaset 2000T or 2000C telephones or enhanced handsets.
kap08b.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Administering the redial memory Administering the redial memory Editing the redial number You can call up a list of redial numbers by pressing z . Select one of the last five different numbers called by pressing Z . You can edit a selected call number in the redial list: x W t Edit Number (t means: scroll with u Z, confirm with x OK ) The input function is activated.
kap08b.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Administering the redial memory Copying a redial number to the directory You can copy a selected call number to the directory. x W t Copy Number (t means: scroll with u Z, confirm with x OK ) The input function is activated. Proceed as described under "New entry" in the chapter entitled "Creating and managing the directory" ➔ page 30. Displaying the call number Up to 16 digits of a call number can be displayed in the redial list.
kap08c.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Input function Input function The input function is always active when names or call numbers are entered or edited, e.g.
kap08c.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Input function Exception The Name field is generally used for entering names. An exception to this occurs when editing base names in the Base Settings – edit names menu. In this instance, the name is edited in the Contents field. Inserting, deleting, and moving characters Inserting Characters are always inserted to the left of the cursor. Deleting Characters to the left of the cursor are deleted by pressing the X display key.
18.7.99 kap08c.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Input function Example: making a new directory entry Select New Entry in the directory menu to obtain the following output on the display: _ s s s s < Name > s s s s s < Tel. num ber > s No characters have been entered yet. ssssssssssssssss W W_s s s s s s s ss s s s s s < Tel. num ber > s ssssssssssssssss < > X The first character (in this case an "W") has been entered. W For information on entering data see ➔ page 41.
kap08c.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Input function W h_te ssss ssssss 089P1234567 s s s s s s ssssssssssssssss < > W h_te X W ssss ssssss 089P1234567 s s s s s s ssssssssssssssss < > X Change the name, e.g. from White to Whyte. Procedure: Using the < button, move the cursor to the letter "t" in the Name field. Press X to delete the letter "i" and enter the new letter "y".
18.7.99 kap08c.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Input function Example: field boundaries If you enter characters in fields that are already fully assigned (16 in the Name field and 32 in the Contents field), the last character in the relevant field is shifted to the right and thereby lost.
kap08c.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Input function Character set The following table shows how often a key has to be pressed to enter a specific character (letter, digit, and special character).
kap09.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important basic settings Important basic settings Changing the base code/PIN In order to protect basic and individual settings, your Gigaset 2011 has two four-digit "key numbers", the base code and the handset PIN (personal identification number). The factory default for both numbers is "0000". The base code must be known if you want to perform important basic settings or lock the handset for outgoing calls.
kap09.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important basic settings Changing the handset PIN The PIN (personal identification number) for your handset can have up to 8 digits. The factory default for the handset PIN is 4 x "0". Changing the PIN prevents unauthorised persons from clearing entries from your directory, for example. .
kap09.fm5 18.7.
kap09.fm5 18.7.
kap09.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important basic settings Operating in a telephone system To be able to operate your Gigaset 2011 in a telephone system, you must first 1. check the signalling method, 2. enter the analog trunk or MSI 3. enter the pause lengths after the analog trunk or MSI. Call number display (CLIP) can only be used if supported by the telephone system. Possible signalling method settings The factory default for the signaling method is ● DTMF/Flash.
kap09.fm5 18.7.
kap09.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important basic settings Modify the pause length after the analog trunk/MSI Possible pause lengths are: 1 second 2 seconds 3 seconds (factory default) 6 seconds (t means: scroll with u Z, confirm with x OK ) .t Service Activate the Service menu item. #1 o Save the setting. Enter the four-digit base code (factory default: “0000“) . u REDIAL @24 x SET Select pause length of 1 second.
kap09a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual base station settings Individual base station settings You can program your Gigaset 2011 to suit your own individual requirements. The settings are made from a registered handset. Switching the base station ringer off and setting the ringer volume It is possible to define whether the ringers should be signalled at the base station or only on the handset. You can set the ringer volume for the ringer at the base station.
kap09a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual base station settings Activating/deactivating music on hold You are connected to an external party who has been placed on hold while you conduct an internal consultation or you have activated the mute function. The external party will hear music while on hold. Music on hold is activated by default. .t Service (t means: scroll with u Z, confirm with x OK ) Activate the Service menu item.
kap10.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual handset settings Individual handset settings You can program your handset to suit your own individual requirements. All settings are made directly on the handset. When operating with more than one handset, the handset must be registered at the base station (➔ page 69). Setting the handset volume The handset has three volume settings: Level 1 ... Level 3 = handset volume normal ...
kap10.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual handset settings Ringer settings You can set the ringer on your handset to suit your individual requirements. The ringer volume and tone can be modified using the ringer options menu. Setting the ringer volume You can set the ringer volume on your handset to one of seven settings: Level 0 ... Level 6 = Ringer volume off ... loud The factory default is level 6 (loud).
kap10.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual handset settings Activating/deactivating automatic backlight If the automatic backlight is set ( ✓ beside the menu item), the display backlight is activated automatically when you press a key or when a call is signalled (factory default). .t Settings u ON / OFF (t means: scroll with u Z, confirm with x OK ) t Handset Settings t Auto Backlight x x OK Switch the automatic backlight off or on by pressing OFF / ON and save.
kap10.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual handset settings Activating/deactivating notification and warning tones You can switch the following notification tones on and off in the base station menu: ● Key beeps ● Battery low beep ● Range warning ● Confirm beep ● Error beep ● In range beep A ✓ beside the menu item indicates that this function is activated.
kap10.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual handset settings Activating/deactivating the range warning beep If the range warning beep is switched on, a beep sounds if the handset is too far from the base station during a call. You can switch the range warning beep on or off (factory default). .
kap10.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual handset settings Activating/deactivating the in range beep If the in range beep is switched on, it is sounded when a handset that was too far from the base station moves back into range. You can switch the in range beep on or off (factory default: off). .
kap10.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual handset settings Baby alarm level You can set the baby alarm level to one of three levels. (t means: scroll with u Z, confirm with x OK ) .t Settings t Handset Settings t BabyAlarmLevel : Alarm Level 2 u > x OK u < or x { or (Example: alarm level 2 is set) WEITER W< > { OK Change the level. Save the setting or quit the function without saving any changes.
kap10.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Individual handset settings Select services Some of the functions required for the select services offered by Deutsche Telekom are preprogrammed on your handset. You can activate the select services by pressing SVC or from the on-line menu ( ➔ page 8 ) after pressing the Talk key. Select services are activated by default and the a list of the available select services is provided.
kap11.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Displaying call duration Displaying call duration In the following routines, you can use the key sequence x INT u SET ) instead of activating the Service menu item. Activating/deactivating call duration display In the case of external connections (➔ page 17), the call duration display appears approximately 12 seconds after the last digit is dialled. The display remains visible for approximately 4 seconds after the call has been ended.
kap13.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Gigaset 2011 lock functions Gigaset 2011 lock functions Activating/deactivating the lock for outgoing calls It is possible to lock the Gigaset 2011 for outgoing calls. If emergency numbers are stored, they can be dialled even if the lock is active. It is possible to receive calls while the lock function is on. The factory default for this function is deactivated.
kap13.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Gigaset 2011 lock functions Displaying and storing emergency numbers .t Service (t means: scroll with u Z, confirm with x OK ) Select the Service menu item. #2% o x REDIAL Start the setting procedure. Enter the four-digit base code (factory default: "0000"). (➔ page 43).
kap13.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Gigaset 2011 lock functions Barred numbers for handsets By storing barred numbers for each registered handset, you can prevent certain external call numbers or types of number from being dialled if the call number lock is activated (➔ page 65). You can store up to three barred numbers for each handset. Barred numbers can have up to eight digits. Displaying or storing barred numbers .
kap13.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Gigaset 2011 lock functions or u SET End procedure: The barred numbers only take effect if the call number lock is switched on Deleting all barred numbers .t Service (t means: scroll with u Z, confirm with x OK ) Select the Service menu item. #87 o Start the setting procedure. Enter the four-digit base code (factory default: "0000"). (➔ page 43).
kap13.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Gigaset 2011 lock functions Activating/deactivating the call number lock You can activate and deactivate the call number lock separately for each registered handset. Other handsets are not affected by the lock. Calls can still be accepted on the handset even if the call number lock is switched on. The factory default setting is off. .t Service (t means: scroll with u Z, confirm with x OK ) Select the Service menu item.
kap13.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Gigaset 2011 lock functions Setting trunk access for the handset You can define for each registered handset whether or not external calls can be made. A distinction is made between: .t Service ● Unrestricted trunk access (factory default) – external calls allowed, and ● Outward-restricted trunk access – external calls cannot be made but incoming calls can be accepted.
kap14.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Lock functions on the handset Lock functions on the handset It is possible to lock your handset against unauthorised use. Depending on the type of lock you select, emergency numbers can still be called from the handset. Activating/deactivating the handset lock You can lock your handset for outgoing calls to protect it against unauthorised use. Calls can be answered with locked handsets. .
kap14.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Lock functions on the handset Handset display with active lock Display with locked handset The handset lock is switched on. U Handset locked Display with system lock The seizure of the line with or without prior call number entry results in the opposite display. EXTERN --J Display with call number lock Any attempt to dial a barred number is rejected with an error tone.
kap15.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Registering/de-registering more than one handset at the base station Registering/de-registering more than one handset at the base station You can operate up to six handsets of the types Gigaset 2000S and/or Gigaset 2000C or Gigaset 2000T as well as the Gigaset 1000TAE cordless socket at a Gigaset 2011 base station.
kap15.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Registering/de-registering more than one handset at the base station If you do not enter one of the numbers, the system automatically assigns the next free handset number after several seconds. Registration is complete when the station selected is displayed.
kap16.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Operating more than one handset Operating more than one handset Call allocation for incoming calls It is possible to set how incoming calls should be signalled when operating several handsets. A distinction is made between: Collective call group Call group 1 Call group 1 ● Collective call (factory default) – incoming calls are signalled to all registered handsets.
kap16.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Operating more than one handset Excluding or including a handset from/into collective call .t Service (t means: scroll with u Z, confirm with x OK ) Activate the Service menu item #1 o x REDIAL : 2 1 Start the setting procedure. Enter the four-digit base code (factory default:”0000“) (➔ page 43). The current setting is shown on the display.
kap16.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Operating more than one handset Setting the number of rings for ring priority .t Service (t means: scroll with u Z, confirm with x OK ) Activate the Service menu item. #1 o x REDIAL : 6 Start the setting procedure. Enter the four-digit base code (factory default:”0000“) (➔ page 43).
kap17.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Operating at more than one base station Operating at more than one base station You can register and operate your handset at up to 6 Gigaset base stations (as of Gigaset 1010 and Gigaset 2010 and higher). This offers the following advantages: ● You can operate the same handset at base stations in different geographical locations (e.g. in the office and at home).
kap17.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Operating at more than one base station Selecting the best station The handset automatically selects the station to which it can set up the best radio connection. (t means: scroll with u Z, confirm with x OK ) .t Select Base : Best Base Base 1 Base 2 u Z Y Z{ x OK OK Select Best Base and press OK to confirm.
kap17.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Operating at more than one base station Base station names You can change the preset base station names ("Base 1" to "Base 6"). In a company, one station can be called "Purchasing", for example, and another "Stock". You can also use this function to name handsets (➔ page 73) .t Settings (t means: scroll with u Z, confirm with x OK ) t Base Settings u Z Select the base station you want to rename.
kap17a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Short cuts Short cuts Descriptions with example A short cut is a series of commands that is stored under a short cut name and can be activated from the list of short cut names in the same way as a directory entry. Short cuts are very useful for base stations at which the Gigaset 2000C must be operated with key combinations. You can store operating sequences or inputs for base station settings.
kap17a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Short cuts New entry To create a short cut, call up the short cut function in the main menu. If no short cut has previously been created, the short cut list will contain a broken line. You can create a new short cut using the New Entry option in the short cut menu. .t Short Cut u (t means: scroll with u Z, confirm with x OK ) W t New Entry When you select New Entry you can access a one-line Name field and a two-line Contents field.
kap17a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Short cuts Unit check s s s s s s ss _s s s s s s s s s s s s s s s ssssssssssssssss X < > u W t Insert Function W t SET Key Unit check s s s s s s ss S_s s s s s s s s s s s s s s ssssssssssssssss X < > W The numerical values and the *, # symbols are entered directly via the keypad.
kap17a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Short cuts Cancelling a procedure You can also delete the entry by selecting Cancel. u W t Cancel Checking for double entries To avoid having a short cut feature several times in your list under different names, you can have the list checked automatically. As soon as an identical entry is found, it is indicated on the display. For this function, the cursor must be located in the Contents field.
kap17a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Short cuts Displaying an entry Short cuts can be displayed for checking purposes. .t Short Cut u (t means: scroll with u Z, confirm with x OK ) x Z Select the entry you wish to display from the list and call up the Display Entry menu option. W t Display Entry The short cut name and contents will be shown on the display. You can return to the short cuts list by pressing the GO BACK display key.
kap17a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Short cuts Copying an entry/memory Short cut entries can be copied between enhanced Gigaset 2000T or 2000C telephones/handsets. The Gigaset 2011 base station supports this feature. .t Short Cut (t means: scroll with u Z, confirm with x OK ) x Z Select the required entry from the list. Activate Copy Entry from the additional menu.
kap17a.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Short cuts Starting a short cut If one or more short cuts have been created, you can select them and start them when you are both off-line and on-line (after pressing the Talk key). .t Short Cut u (t means: scroll with u Z, confirm with x OK ) x Z Select the desired short cut from the list and call up the Start menu option. W t Start The active status is shown on the display until the short cut is executed.
kap17a.fm5 18.7.
18.7.99 kap18.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation Important notes on putting into service and operation Installing the base station Installation site/installation area ● A 220/230 V AC power socket must be located at the installation site. ● In order to avoid interference, the base station should not be in the direct vicinity of other electronic equipment such as Hi-fi, office or microwave equipment.
kap18.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation Notes on operating the handset For users who wear hearing aids If you wear a hearing aid, please note that radio signals can interfere with hearing aids, and if sufficiently loud, can cause a very unpleasant humming sound.
18.7.99 kap18.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation Once the NiMH rechargeable batteries have been inserted, the following should be observed to ensure maximum lasting power from your batteries: once the batteries have been fully charged for the first time, the handset prematurely indicates that the batteries are running low ( i ).
kap18.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation ● After they have initially been thoroughly charged (proven charging time approx. 16 hours), the rechargeable batteries are fully operative. The rechargeable batteries should be discharged from time to time. Caution: partially discharged batteries only offer limited operating time. ● Make sure that the contacts do not touch metal or oily objects.
kap18.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation Operating with the Gigaset 2000S (1000S) handset The Gigaset 2000S (1000S) handset supports all Gigaset 2011 features. Differences in operation Gigaset 2000C (Gigaset 1000C) c or a .t u x x x x x x Service Gigaset 2000S c or a B SET B REDIAL O z O COLL.CALL I* ACCEPT BR LIST.ON BR LIST.
kap18.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation Connecting the telephone socket Only use a Siemens telephone cord. Non-Siemens cords may have a different pin assignment.
kap18.fm5 18.7.
kap18.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation Third party use/disposal Your Gigaset 2011 telephone should only be passed onto third parties if the instructions for use are included. When the system or batteries have reached the end of their service life, they should be disposed of in an environmentally friendly manner in accordance with relevant legislation.
kap18.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation Procedure in the case of malfunctions Not every malfunction means that there is an actual defect in your telephone. In some situations you may save time and money if you can eliminate the cause of simple faults yourself. The information below will help you do this. Symptom Cause Remedy No display appears. Handset is not switched on. Switch on the handset. Battery is empty.
kap18.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation Symptom Cause Remedy Base code entered is rejected. Base code entered does not correspond with the changed code. If you have forgotten your changed base code, please contact the manufacturer (for call number see under "Contact person"). PIN entered is rejected. PIN entered does not correspond with the changed PIN.
kap18.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Important notes on putting into service and operation Overview: signal tones Ring tone: tuuuuut tuuuuut 0.8 s tone Recall: 0.8 s tone tuuuuut tuuuuut 0.8 s ton Internal dial tone: 2 s pause 0.8 s pause tuuut tuuut tuuut 3 x 0.2 s tone repetition following 0.8 s pause Internal busy tone: tuuuut 0.5 s tone Warning tone/batteries almost empty: 0.5 s pause tuuuut 0.
kap18a.fm5 17.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-7619 Special accessories Special accessories The devices described below are available from your specialist dealer. Gigaset 1000TAE Cordless socket for operating corded terminals at base stations in the Gigaset 1000/2000 range.
kap18a.fm5 17.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-7619 Special accessories Gigaset 2000S Gigaset 2000S offers the following features: ● 16-digit display for call numbers, operating statuses and battery charging status ● Speed-dialling memory for 10 call numbers ● Redial for last five call numbers ● En-bloc dialling with correction option Gigaset 2000T Gigaset 2000T is an enhanced telephone that supports handsfree talking/open listening and only requires a 230 V socket.
kap19_en.fm5 17.7.99 Gigaset 2011 Comfort: A30852-X1106-B307-1-7619 Quick reference guide handset Gigaset 2000C Quick reference guide handset Gigaset 2000C Switch handset to ON/OFF/PROTECTED: Accepting a call: External call: h Call rings: remove the handset from the charging unit or press the Talk key c (automatic call acceptance can be set). Press c, then dial the call number. Or: o dial call number, then press c. Internal call: Press INT . Then press 1...6 to dial internal call number.
17.7.99 giga2011.SIX Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-7619 Index Index A Activating a short cut .................................... 83 Additional menu, activating ............................. 6 Alert character, number for ring priority ........ 73 Alphanumeric keypad .................................... 41 Analog trunk .................................................. 48 Analog trunk/MSI, deleting ........................... 49 Automatic backlight, activate/deactivate .......
giga2011.SIX 17.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Index Display with active locks ............................... 68 Disposal ........................................................ 92 DTMF (dual-tone multifrequency signalling) ........................................... 4, 13, 23 E Emergency numbers deleting ................................................... 62 displaying ................................................ 62 explanation .............................................
17.7.99 giga2011.SIX Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-7619 Index Outgoing calls, external ................................ 17 Outward-restricted trunk access .............66, 68 Overview keys .......................................................... V symbols on the display ............................ VI P Pause length according to analog trunk/MSI . 49 Pause, manual ............................................... 18 Personal identification number ..................... 43 PIN changing ...
giga2011.SIX 17.7.99 Index U Unrestricted trunk access ............................. 66 Users calling external parties ............................ 17 making internal calls ............................... 25 no answer ............................................... 18 W Warranty .......................................................
kap20.fm5 17.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1- Issued by Private Communication System Group Hofmannstraße 51, D-81359 München © Siemens AG 1998. All rights reserved. Subject to availability. Right of modification reserved. Siemens AG http://www.siemens.de Ref. no.
