Data Sheet for Product

Technical Instructions MT Series SSC Electronic Valve Actuator, 24 Vac Floating Control
Document Number 155-314P25
May 8, 2019
Page 6 Siemens Industry, Inc.
Manual Override
For manual positioning, the override knob is
in the center of the position indicator. See
Figure 9.
Figure 9. Manual Override.
Start-up
Check the wiring and the position indicator.
See Figure 10.
Position Indicator
Output Shaft
0
Retracted
1
Extended
Figure 10. Position Indicator
(Shown in the 0 Position).
Troubleshooting
Check the wiring for proper connections.
Service Kits
If the actuator is inoperative, replace the unit.
Disposal
The device is considered electrical and electronic equipment for
disposal in terms of the applicable European Directive and may not be
disposed of as domestic garbage.
Dispose of the device through channels provided for this
purpose.
Comply with all local and currently applicable laws and
regulations.