Installation Instructions

Document No. 129-217
Installation Instructions
September 24, 2018
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Flowrite is a trademark of Siemens Industry, Inc. Other product or company names mentioned herein may be
the trademarks of their respective owners. © 2018 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
Tel. [phone]
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail]
Document No. 129-217
Printed in the USA
Page 6 of 6
Dimensions, Continued
CAUTION:
Be careful when removing the knockout. Do not
damage the circuit board.
NOTE: Use the top knockout position when installing the
Weather Shield.
SERVICE ENVELOPE
MINIMUM ACCESS
SPACE RECOMMENDED
4 inches (100 mm)
8 inches (200 mm)
Figure 17. SKD…U Dimensions in Inches (Millimeters).