User Manual

114/146
Siemens Desigo Insight, Operating the management station, V6.0 SP3 CM110588en01_11
Building Technologies Alarm handling 2018-09-05
You can filter the Alarm Viewer table by the same general methods described in the
general handling section.
Save present filters
Filt
er Connected Sites
Turn off filter
List of available filters
Display, whether filter is active Actively save filters (if available)
The filter effect is also applied if you jump from the Desigo Insight taskbar alarm
summary icons.
Examples of filters you may find useful are:
· All alarms of a specific priority
· All alarms after this morning at 0800
· All alarms pertaining to e.g. the boiler plant.
This is an optional text note that can be appended to an alarm object, to assist you
in someway with the situation. An example is provided below:
This can only be done using Object Viewer. Only users with higher access rights
can create or change instructions as described in the section "Object Viewer".
In a large Desigo system, there may be many hundreds of alarm objects. For this
reason, Alarm Viewer does not routinely poll all points just in case they may be in
alarm, rather it reacts to events as they happen. We refer to this as a COV
(Change of Value) mechanism. You can check if Alarm Viewer is up to date via the
Refresh icon:
No new data available.
New data. Click here to update.
A similar mechanism applies to Log Viewer.
Filter
Alarm “To Do” text
Edit the To Do text
Alarm Viewer refresh
Note