User Manual

132/146
Siemens Desigo Insight, Operating the management station, V6.0 SP3 CM110588en01_11
Building Technologies Alarm handling 2018-09-05
– Open the MS Windows command interpreter (the DOS window in
Windows)
– Enter NSLOOKUP.
– Enter SMTP.
6. Click Finish to save the data.
1. Open the System Configurator in the Desigo Insight taskbar.
2. Open Desigo Insight Programs > E-Mail > E-Mail Receiver by clicking +.
3. Right-click the E-Mail Receiver folder and select Add.
4. Configure the e-mail receiver.
Receiver name This is not the SMTP receiver name, rather a descriptor that is
used in Desigo Insight alone.
E-mail system Select the system you created in the section above.
Comment A description may be added here; it has no bearin
g on the mail
transfer.
To This must be a recognized addressee using the format shown.
Cc This is the usual “Copy” option allowing you to send an alarm
message, for example to 2 people at once.
Subject Subject line appears in the e-mail header as usual.
Message template Two standard formats are delivered with Desigo Insight. They
are described below.
Designation replacement file This is optional, and may translate extended ASCII characters
into other characters.
5. Click Finish to save the data.
Instead of ADD, you can use the Copy option in the context menu (right-click).
Depending on your e-mail client application, the e-mail appears as follows (here
using Microsoft Outlook):
Define addresses for the
e-mail
How the message
appears in your e-mail