User Manual

91 / 146
Siemens Desigo Insight, Operating the management station, V6.0 SP3 CM110588en01_11
Building Technologies Operate graphics 2018-09-05
1. Move the mouse cursor over the alarm bell.
Left-click inside the frame to open the super genie.
Data point selection.
Data point description.
Hardware state.
Process state.
Acknowledge alarm. Reset alarm.
Exit button.
2. Click to display data point information.
3. Acknowledge or reset the alarm using the buttons.
4. Exit the super genie.
7.11 Modify object and property values in Plant
Viewer
Plant Viewer is designed to allow you to modify values via the graphical interface.
The various operations can be categorized as follows:
· Modification of values and states via the super genie.
· Modification of values and states directly in the graphics pages using the
standard buttons for operation.
The standard buttons used to operate the different object types are basically the
same in both the super genie and the graphics pages. They are described below. It
is possible that your project may include additional buttons or other elements for
operation.
Depending on access rights, you can view values or change them. Desigo Insight
is designed to gray out buttons with lower access rights or a super genie displays
less information.
Enter a text in the comment field for projects requiring a mandatory change
comment upon change of value. The change of value is activated only after you
click OK.
Types of operation
Access rights
Change comment
required