Data Sheet for Product
Pressure Independent Control Series Rack & Pinion Actuators Technical Instructions
Document No. A6V11637981
March 5, 2019
Siemens Industry, Inc. Page 3
Specifications
Power supply
Operating voltage 24 Vac ±20%, 24 Vdc ±20%
Frequency 50/60 Hz
Power consumption
599-03616 assembly
(with GPC131.1P actuator) 3.5 VA running, 2.8 VA holding
599-03617 assembly
(with GPC161.1P actuator) 3.5 VA running, 2.8 VA holding
Equipment rating 24 Vac/Vdc Class 2, in accordance with UL/CSA
Control signal
(599-03617 assembly
with GPC161.1P
actuator)
Input signal
voltage input 0 (2) to 10 Vdc (max. 35 Vdc)
input resistance 100K ohms
Position output feedback signal 0 (2) to 10 Vdc, 1 mA maximum
Run Time for 90°
Operating with motor 60 seconds
On power loss with spring return 15 seconds, typical
Ambient conditions
Ambient temperature
operation -25 to 130F (-32 to 55C)
storage and transport -40 to 158F (-40 to 70C)
Ambient humidity (non-condensing) 95% rh
Mounting
Nominal angle of rotation 90
Maximum angular rotation 95
Enclosure NEMA 1 (see Figure 1.)
Linkage
Frame Aluminum alloy frame
Construction Steel rack, pinion and stem shaft pre-
lubricated, bronze bushings
Agency certification
UL GPC Actuator UL-listed per UL 60730
cUL to CSA 60730
NOTE: These actuators were approved for installation in plenum areas by Underwriters
Laboratories, Inc. (UL) per UL 2043.
Physical characteristics
Actuator enclosure IP54
Pre-connected cable 18 AWG, 3 ft (0.9 m)
Dimensions See Figure 2.
Weight 1.32 lb (0.60 kg)
For valve specifications, see the following document:
Pressure Independent Control Series Two-Way, Brass Valve Bodies, 1/2-inch to 2-inch, ANSI 250 Technical
Instructions (155-774).
For OpenAir® Electronic Damper Actuator specifications, see the following document:
OpenAir® GPC Series Spring Return, 35 lb-in (4 Nm), Rotary Electronic Damper Actuators Technical Instructions
(155-782).