- Operating Manual 383V FA

Colour monitor 383V FA
12 - English A26361-K873-Z100-2-5E19
To set the OSD menu, perform the following steps:
Ê Press the MENU button to activate the OSD menu.
The main menu appears on the screen with menu options for the setting functions.
The first option (CONTRAST) is highlighted.
Ê If necessary, press the - or + button to mark
another option (e.g. LCD ADJUST).
Ê Press the MENU button to select the
highlighted option.
The corresponding submenu (here: LCD ADJUST) is displayed.
The first option (H-SIZE) is highlighted.
Ê If necessary, press the - or + button to mark
another option.
Ê Press the MENU button briefly to select the
highlighted option.
All changes are stored automatically. The OSD menu disappears after 30 seconds if no button on
the control panel is pressed or if you press the MENU button for more than 2 seconds. You press
the MENU button only briefly to select a different function.
If you want to change other settings, select the corresponding function from the OSD main menu. All
possible adjustments of the main menu are described in the following.
i
The OSD menu for analogue monitor operation is described in the following. During digital
operation some functions are not available, as they are not required due to the digital
transmission technology used.