- Operating Manual 383V FA

Colour monitor 383V FA
18 - English A26361-K873-Z100-2-5E19
Electrical data
Video: analogue: positive, 0.7 V
pp
, 75 Ω
digital: Panel Link TDMS
Synchronisation: Separate Sync. TTL, positive or negative
Composite Sync. TTL, positive or negative
Horizontal frequency: 30 kHz .... 62 kHz
Refresh rate: 50 Hz .... 75 Hz
Maximum pixel rate: analogue: 80 MHz
digital: 135 MHz
Power supply: 100 V - 240 V
Total power consumption: < 35 W (ON, Normal mode)
< 3 W in the energy-saving mode (standby mode, suspend
mode and OFF mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
Humidity:
15 °C .... 35 °C
20 % .... 85 %
Limit range of operation:
Humidity:
0 °C .... 40 °C
10 % .... 90 %
Condensation must be avoided.
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
i
If the monitor 383V FA is not yet displayed in the list of monitors, you can select the
following monitor instead:
Fujitsu Siemens 381V, 38B1, 3814 FA
Siemens or Siemens Nixdorf MCF 3511 TA, MCM 1405 ND