Data Sheet

ManualsBrandsSiemens ManualsElectromechanicsSiemens Heating current monitor 1 pc(s) 3RF 2932-0 YES 16

Data sheet 3RF2932-0JA16

Heat current monitoring Current range 32 A / 40 °C 400-

600 V / 24 V AC/DC for semiconductor relay / contactor

Remote teach/without control connector

General technical data

Product brand name SIRIUS

Product designation heating current monitoring

Product function solid-state relay / solid-state contactor 3RF2

Number of poles for main current circuit 0

Protection class IP IP20

Product designation _1 of the accessories that can

be ordered

sealable end cover

Manufacturer's article number _1 of the accessories

that can be ordered

3RF2900-0RA88

Hole diameter of the current transformer mm 17

Number of partial loads for load monitoring 6

Ambient temperature

● during operation

°C -25...+60

● during storage

°C -55...+80

Installation altitude at height above sea level

maximum

m 1000

Vibration resistance acc. to IEC 60068-2-6 2g

Shock resistance acc. to IEC 60068-2-27 15g / 11 ms

3RF2932-0JA16 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 3RF2932-0JA16 Heat current monitoring Current range 32 A / 40 °C 400600 V / 24 V AC/DC for semiconductor relay / contactor Remote teach/without control connector General technical data Product brand name SIRIUS Product designation heating current monitoring Product function solid-state relay / solid-state contactor 3RF2 Number of poles for main current circuit 0 Protection class IP IP20 Product designation _1 of the accessories that can be ordered sealable end cover Manufacturer's a
PAGE 2
Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 A Reference code acc. to DIN EN 61346-2 B Main circuit Number of NO contacts for main contacts 0 Number of NC contacts for main contacts 0 Operating current A 32 °C 40 ● at 50 Hz rated value V 400 ... 600 ● at 60 Hz rated value V 400 ... 600 ● at 50 Hz V 340 ... 660 ● at 60 Hz V 340 ... 660 Operating frequency rated value Hz 50 ...
PAGE 3
Relative symmetrical tolerance of the supply voltage frequency % 10 ● at AC rated value mA 40 ● at DC rated value mA 40 s 0.1 ... 3 Control current Response delay Auxiliary circuit Number of NC contacts for auxiliary contacts 1 Number of NO contacts for auxiliary contacts 0 Number of CO contacts for auxiliary contacts 0 Operating voltage of auxiliary contacts ● at AC V 15 ... 30 ● at DC V 15 ... 30 ● at AC mA 5 ... 1 000 ● at DC mA 5 ...
PAGE 4
AWG number as coded connectable conductor cross section for auxiliary and control contacts 12 ... 20 Wire stripping length of the cable for auxiliary and control contacts mm 7 Tightening torque for auxiliary and control contacts with screw-type terminals N·m 0.5 ... 0.6 Tightening torque [lbf·in] for auxiliary and control contacts with screw-type terminals lbf·in 4.5 ... 5.