Datasheet

ManualsBrandsSiemens ManualsAutomationContactor 4NO 24V 9A 4kW

Data sheet 3RT2016-2JB41

Power contactor, AC-3 9 A, 4 kW / 400 V 1 NO, 24 V DC 0.7-

1.25*US 3-pole, Size S00 Spring-type terminal with integrated diode,

suitable for PLC outputs

Product brand name SIRIUS

Product designation Coupling relay

Product type designation 3RT2

General technical data

Size of contactor S00

Product extension

● function module for communication

● Auxiliary switch

Surge voltage resistance

● of main circuit rated value

6kV

● of auxiliary circuit rated value

6kV

maximum permissible voltage for safe isolation

● between coil and main contacts acc. to EN

60947-1

400V

Protection class IP

● on the front

IP20

● of the terminal

IP20

Shock resistance at rectangular impulse

● at DC

6,7g / 5 ms, 4,2g / 10 ms

3RT2016-2JB41 Subject to change without notice

Page 1/

Summary of content (11 pages)

PAGE 1
Data sheet 3RT2016-2JB41 Power contactor, AC-3 9 A, 4 kW / 400 V 1 NO, 24 V DC 0.71.
PAGE 2
Shock resistance with sine pulse ● at DC 10,5g / 5 ms, 6,6g / 10 ms Mechanical service life (switching cycles) ● of contactor typical 30 000 000 Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 K Reference code acc. to DIN EN 81346-2 Q Ambient conditions Installation altitude at height above sea level ● maximum 2 000 m Ambient temperature ● during operation -25 ... +60 °C ● during storage -55 ...
PAGE 3
— up to 690 V for current peak value n=20 rated value 5A ● at AC-6a — up to 230 V for current peak value n=30 rated value 3.5 A — up to 400 V for current peak value n=30 rated value 3.5 A — up to 500 V for current peak value n=30 rated value 3.6 A — up to 690 V for current peak value n=30 rated value 3.3 A Minimum cross-section in main circuit ● at maximum AC-1 rated value 4 mm² Operating current for approx. 200000 operating cycles at AC-4 ● at 400 V rated value 4.
PAGE 4
— at 110 V rated value 0.35 A ● with 3 current paths in series at DC-3 at DC-5 — at 24 V rated value 20 A — at 110 V rated value 20 A — at 220 V rated value 1.5 A — at 440 V rated value 0.2 A — at 600 V rated value 0.2 A Operating power ● at AC-1 — at 230 V rated value 7.5 kW — at 230 V at 60 °C rated value 7.
PAGE 5
● Full-scale value 1.25 Design of the surge suppressor with diode Closing power of magnet coil at DC 2.8 W Holding power of magnet coil at DC 2.8 W Closing delay ● at DC 35 ... 60 ms Opening delay ● at DC 55 ... 75 ms Arcing time 10 ...
PAGE 6
● for single-phase AC motor — at 110/120 V rated value 0.33 hp — at 230 V rated value 1 hp ● for three-phase AC motor — at 200/208 V rated value 2 hp — at 220/230 V rated value 3 hp — at 460/480 V rated value 5 hp — at 575/600 V rated value 7.
PAGE 7
— downwards 10 mm — at the side 6 mm Connections/ Terminals Type of electrical connection ● for main current circuit spring-loaded terminals ● for auxiliary and control current circuit spring-loaded terminals ● at contactor for auxiliary contacts Spring-type terminals ● of magnet coil Spring-type terminals Type of connectable conductor cross-sections ● for main contacts — solid 2x (0.5 ... 4 mm²) — single or multi-stranded 2x (0,5 ... 4 mm²) — finely stranded with core end processing 2x (0.
PAGE 8
● with low demand rate acc. to SN 31920 40 % ● with high demand rate acc. to SN 31920 73 % Failure rate [FIT] 100 FIT ● with low demand rate acc. to SN 31920 Product function No ● Mirror contact acc. to IEC 60947-4-1 T1 value for proof test interval or service life acc.
PAGE 9
Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3RT2016-2JB41 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RT2016-2JB41&lang=en Characteristic: Tripping characteristics, I²t, Let-through current https://support.industry.siemens.com/cs/ww/en/ps/3RT2016-2JB41/char Further characteristics (e.g.