Datasheet

ManualsBrandsSiemens ManualsAutomationOverload Relay SIRIUS 3Ru2 7 ... 10A 230/24VAC/VDC Class 10 1NC + 1NO 3RU2 Series

Data sheet 3RU2116-1JC0

OVERLOAD RELAY 7.0...10 A FOR MOTOR PROTECTION SZ

S00, CLASS 10, F. MOUNTING ONTO CONTACTOR MAIN

CIRCUIT: SPRING TERMINAL AUX. CIRCUIT: SPRING TERMINAL

MANUAL-AUTOMATIC-RESET

product brand name SIRIUS

Product designation 3RU2 thermal overload relay

General technical data:

Size of overload relay S00

Size of contactor can be combined company-specific S00

Power loss [W] total typical 6.1W

Insulation voltage with degree of pollution 3 rated

value

690V

Surge voltage resistance rated value 6kV

Protection class IP

● on the front

IP20

● of the terminal

IP20

Shock resistance

● acc. to IEC 60068-2-27

8g / 11 ms

Type of protection Ex e

Certificate of suitability relating to ATEX DMT 98 ATEX G 001

Protection against electrical shock finger-safe

Equipment marking acc. to DIN EN 81346-2 F

Ambient conditions:

3RU2116-1JC0 Changes preserved

Page 1/

Summary of content (7 pages)

PAGE 1
Data sheet 3RU2116-1JC0 OVERLOAD RELAY 7.0...10 A FOR MOTOR PROTECTION SZ S00, CLASS 10, F. MOUNTING ONTO CONTACTOR MAIN CIRCUIT: SPRING TERMINAL AUX. CIRCUIT: SPRING TERMINAL MANUAL-AUTOMATIC-RESET product brand name SIRIUS Product designation 3RU2 thermal overload relay General technical data: Size of overload relay S00 Size of contactor can be combined company-specific S00 Power loss [W] total typical 6.
PAGE 2
Installation altitude at height above sea level maximum 2 000 m Ambient temperature ● during operation -40 ... +70 °C ● during storage -55 ... +80 °C ● during transport -55 ... +80 °C Temperature compensation -40 ... +60 °C Main circuit: Number of poles for main current circuit 3 Adjustable response value current of the currentdependent overload release 7 ... 10 A Operating voltage ● rated value 690 V ● at AC-3 rated value maximum 690 V Operating frequency rated value 50 ...
PAGE 3
UL/CSA ratings: Full-load current (FLA) for three-phase AC motor ● at 480 V rated value 10 A ● at 600 V rated value 10 A Contact rating of auxiliary contacts according to UL B600 / R300 Installation/ mounting/ dimensions: Mounting position any Mounting type direct mounting Height 87 mm Width 45 mm Depth 70 mm Required spacing ● with side-by-side mounting — forwards 0 mm — Backwards 0 mm — upwards 6 mm — downwards 6 mm — at the side 6 mm ● for grounded parts — forwards 0 mm — Back
PAGE 4
— single or multi-stranded 1x (0,5 ... 4 mm²) — finely stranded with core end processing 1x (0.5 ... 2.5 mm²) — finely stranded without core end processing 1x (0.5 ... 2.5 mm²) ● at AWG conductors for main contacts 1x (20 ... 12) Type of connectable conductor cross-sections ● for auxiliary contacts — single or multi-stranded 2x (0,5 ... 2,5 mm²) — finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) — finely stranded without core end processing 2x (0.5 ... 1.
PAGE 5
General Product Approval Declaration of Conformity Test Certificates For use in hazardous locations Shipping Approval Typprüfbescheinigu ng/Werkszeugnis Shipping Approval other Umweltbestätigung Railway Schwingen/Schocke n Further information Information- and Downloadcenter (Catalogs, Brochures,…) http://www.siemens.com/industrial-controls/catalogs Industry Mall (Online ordering system) https://mall.industry.siemens.
PAGE 6
89.4 36 84.4 70.5 86.5 104 45 70 3RU2116-1JC0 Page 6/7 19.02.
PAGE 7
-F STOP RESET TEST UEBERLASTRELAIS FUER MOTORSCHUTZ 1/L1 3/L2 5/L3 95 97 2/T1 4/T2 6/T3 96 98 last modified: 3RU2116-1JC0 Page 7/7 OVERLOAD MOTOR PROTECTION RELAY FOR 16.02.2016 19.02.