Datasheet

ManualsBrandsSiemens ManualsCircuit BreakersMotor Protection Switch SIRIUS 3Rv2

Data sheet 3RV2011-1DA20

CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS

10, A-REL.2.2...3.2A, N-RELEASE 42A, SPRING-L. CONNECTION,

STANDARD SW. CAPACITY

product brand name SIRIUS

Product designation 3RV2 circuit breaker

General technical data:

Size of the circuit-breaker S00

Size of contactor can be combined company-specific S0

Product expansion

● Auxiliary switch

Yes

Power loss [W] total typical 6W

Insulation voltage with degree of pollution 3 rated

value

690V

Surge voltage resistance rated value 6kV

maximum permissible voltage for safe isolation

● in networks with grounded star point between

main and auxiliary circuit

400V

● in networks with grounded star point between

main and auxiliary circuit

400V

Protection class IP

● on the front

IP20

● of the terminal

IP20

3RV2011-1DA20 Changes preserved

Page 1/

Summary of content (8 pages)

PAGE 1
Data sheet 3RV2011-1DA20 CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-REL.2.2...3.2A, N-RELEASE 42A, SPRING-L. CONNECTION, STANDARD SW.
PAGE 2
Shock resistance ● acc. to IEC 60068-2-27 25g / 11 ms Mechanical service life (switching cycles) ● of the main contacts typical 100 000 ● of auxiliary contacts typical 100 000 Electrical endurance (switching cycles) ● typical 100 000 Type of protection Increased safety Certificate of suitability relating to ATEX on request Protection against electrical shock finger-safe Equipment marking acc.
PAGE 3
Number of NC contacts ● for auxiliary contacts 0 Number of NO contacts ● for auxiliary contacts 0 Number of CO contacts ● for auxiliary contacts 0 Protective and monitoring functions: Trip class CLASS 10 Design of the overload release thermal Operational short-circuit current breaking capacity (Ics) at AC ● at 240 V rated value 100 kA ● at 400 V rated value 100 kA ● at 500 V rated value 100 kA ● at 690 V rated value 10 kA Maximum short-circuit current breaking capacity (Icu) ● at AC at 240
PAGE 4
Short-circuit protection Design of the short-circuit trip magnetic Design of the fuse link for IT network for short-circuit protection of the main circuit ● at 400 V gL/gG 25 A ● at 500 V gL/gG 32 A ● at 690 V gL/gG 25 A Installation/ mounting/ dimensions: Mounting position any Mounting type screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 Height 106 mm Width 45 mm Depth 96 mm Required spacing ● with side-by-side mounting — forwards 0 mm — Backwards
PAGE 5
● for main contacts — single or multi-stranded 2x (0,5 ... 4 mm²) — finely stranded with core end processing 2x (0.5 ... 2.5 mm²) — finely stranded without core end processing 2x (0.5 ... 2.5 mm²) ● at AWG conductors for main contacts Design of screwdriver shaft 2x (20 ... 12) Diameter 5 to 6 mm Safety related data: B10 value with high demand rate acc. to SN 31920 50 000 Proportion of dangerous failures ● with low demand rate acc. to SN 31920 40 % ● with high demand rate acc.
PAGE 6
General Product Approval For use in hazardous locations KTL For use in hazardous locations Declaration of Conformity Test Certificates Typprüfbescheinigu ng/Werkszeugnis Shipping Approval spezielle Prüfbescheinigunge n Werksbescheinigun gen Shipping Approval Shipping Approval other Umweltbestätigung Railway Bestätigungen Schwingen/Schocke n Further information Information- and Downloadcenter (Catalogs, Brochures,…) http://www.siemens.
PAGE 7
96.9 106 53.5 45 5 3RV2011-1DA20 Page 7/8 26.02.
PAGE 8
-F 1/L1 3/L2 5/L3 I> I> I> 2/T1 4/T2 6/T3 last modified: 3RV2011-1DA20 Page 8/8 24.02.2016 26.02.