Data Sheet

ManualsBrandsSiemens ManualsAutomation3RV2011-0KA10-0BA0 Circuit breaker 1 pc(s) Adjustment range (amperage): 0.9 - 1.25 A Switching voltage (max.):

Data sheet 3RV2011-0KA10-0BA0

Special type Circuit breaker size S00 for motor protection, Class 10

A-release 0.9-1.25 A N-release 16 A screw terminal Standard

switching capacity Ambient temperature -50 °C 500 switching cycles

Product brand name SIRIUS

Product designation Circuit breaker

Design of the product For motor protection

Product type designation 3RV2

General technical data

Size of the circuit-breaker S00

Size of contactor can be combined company-specific S00, S0

Product extension

● Auxiliary switch

Yes

Power loss [W] for rated value of the current

● at AC in hot operating state per pole

2.4W

Insulation voltage with degree of pollution 3 rated

value

690V

Surge voltage resistance rated value 6kV

maximum permissible voltage for safe isolation

● in networks with grounded star point between

main and auxiliary circuit

400V

● in networks with grounded star point between

main and auxiliary circuit

400V

3RV2011-0KA10-0BA0 Subject to change without notice

Page 1/

Summary of content (8 pages)

PAGE 1
Data sheet 3RV2011-0KA10-0BA0 Special type Circuit breaker size S00 for motor protection, Class 10 A-release 0.9-1.
PAGE 2
Protection class IP ● on the front IP20 ● of the terminal IP20 Shock resistance ● acc. to IEC 60068-2-27 25g / 11 ms Mechanical service life (switching cycles) ● of the main contacts typical 500 ● of auxiliary contacts typical 500 Electrical endurance (switching cycles) ● typical 500 Protection against electrical shock finger-safe when touched vertically from front acc. to IEC 60529 Reference code acc.
PAGE 3
Auxiliary circuit Number of NC contacts for auxiliary contacts 0 Number of NO contacts for auxiliary contacts 0 Number of CO contacts ● for auxiliary contacts 0 Protective and monitoring functions Product function ● Ground fault detection No ● Phase failure detection Yes Trip class CLASS 10 Design of the overload release thermal Operational short-circuit current breaking capacity (Ics) at AC ● at 240 V rated value 100 kA ● at 400 V rated value 100 kA ● at 500 V rated value 100 kA ● at 69
PAGE 4
Mounting type screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 Height 97 mm Width 45 mm Depth 97 mm Required spacing ● with side-by-side mounting — forwards 0 mm — Backwards 0 mm — upwards 50 mm — downwards 50 mm — at the side 0 mm ● for grounded parts — forwards 0 mm — Backwards 0 mm — upwards 50 mm — at the side 30 mm — downwards 50 mm ● for live parts — forwards 0 mm — Backwards 0 mm — upwards 50 mm — downwards 50 mm — at the side
PAGE 5
M3 ● for main contacts Safety related data Proportion of dangerous failures ● with low demand rate acc. to SN 31920 50 % ● with high demand rate acc. to SN 31920 50 % Failure rate [FIT] ● with low demand rate acc. to SN 31920 T1 value for proof test interval or service life acc.
PAGE 6
Further characteristics (e.g. electrical endurance, switching frequency) http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RV2011-0KA10-0BA0&objecttype=14&gridview=view1 96.