Data Sheet

ManualsBrandsSiemens ManualsAutomation3RV2011-1JA40 Circuit breaker 1 pc(s) Adjustment range (amperage): 7 - 10 A Switching voltage (max.): 690 V AC

Data sheet 3RV2011-1JA40

Circuit breaker size S00 for motor protection, CLASS 10 A-release

7...10 A N release 130 A ring cable lug connection Standard

switching capacity

Product brand name SIRIUS

Product designation Circuit breaker

Design of the product For motor protection

Product type designation 3RV2

General technical data

Size of the circuit-breaker S00

Size of contactor can be combined company-specific S00, S0

Product extension

● Auxiliary switch

Yes

Power loss [W] for rated value of the current

● at AC in hot operating state per pole

3.1W

Insulation voltage with degree of pollution 3 rated

value

690V

Surge voltage resistance rated value 6kV

maximum permissible voltage for safe isolation

● in networks with grounded star point between

main and auxiliary circuit

400V

● in networks with grounded star point between

main and auxiliary circuit

400V

3RV2011-1JA40 Subject to change without notice

Page 1/

Summary of content (9 pages)

PAGE 1
Data sheet 3RV2011-1JA40 Circuit breaker size S00 for motor protection, CLASS 10 A-release 7...
PAGE 2
Protection class IP ● on the front IP00 ● of the terminal IP00 Shock resistance ● acc. to IEC 60068-2-27 25g / 11 ms Mechanical service life (switching cycles) ● of the main contacts typical 100 000 ● of auxiliary contacts typical 100 000 Electrical endurance (switching cycles) ● typical 100 000 Type of protection according to ATEX directive 2014/34/EU Ex II (2) GD Certificate of suitability according to ATEX directive 2014/34/EU DMT 02 ATEX F 001 Reference code acc.
PAGE 3
Operating frequency ● at AC-3 maximum 15 1/h Auxiliary circuit Number of NC contacts for auxiliary contacts 0 Number of NO contacts for auxiliary contacts 0 Number of CO contacts ● for auxiliary contacts 0 Protective and monitoring functions Product function ● Ground fault detection No ● Phase failure detection Yes Trip class CLASS 10 Design of the overload release thermal Operational short-circuit current breaking capacity (Ics) at AC ● at 240 V rated value 100 kA ● at 400 V rated value
PAGE 4
Product function Short circuit protection Yes Design of the short-circuit trip magnetic Design of the fuse link for IT network for short-circuit protection of the main circuit ● at 400 V gL/gG 50 A ● at 500 V gL/gG 40 A ● at 690 V gL/gG 40 A Installation/ mounting/ dimensions Mounting position any Mounting type screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 Height 97 mm Width 45 mm Depth 97 mm Required spacing ● with side-by-side mounting — forward
PAGE 5
Tightening torque ● for main contacts for ring cable lug 0.8 ... 1.2 N·m ● for auxiliary contacts for ring cable lug 1.2 ... 0.8 N·m Outer diameter of the usable ring cable lug maximum 7.5 mm Design of screwdriver shaft Diameter 5 to 6 mm Size of the screwdriver tip Size 2 and Pozidriv 2 Design of the thread of the connection screw ● for main contacts M3 ● of the auxiliary and control contacts M3 Safety related data B10 value ● with high demand rate acc.
PAGE 6
General Product Approval For use in hazardous locations KC For use in hazardous locations Declaration of Conformity Miscellaneous Test Certificates Special Test Certificate Marine / Shipping Type Test Certificates/Test Report Marine / Shipping other Confirmation Railway Vibration and Shock Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) www.siemens.com/sirius/catalogs Industry Mall (Online ordering system) https://mall.industry.siemens.
PAGE 7
96.