Datasheet

Relative positive tolerance / of the control supply voltage / for

% 20

Type of display / for fault signal red

Mechanical design:

Size of the engine control device S00

Width mm 45

Height mm 95

Depth mm 150

Type of mounting screw and snap-on mounting

mounting position With vertical mounting surface +/-10° rotatable, with

vertical mounting surface +/- 10° tiltable to the front

and back

Distance, to be maintained, to the ranks assembly

• upwards mm 60

• sidewards mm 15

• downwards mm 40

Installation altitude / at a height over sea level m 5,000

Cable length / maximum m 300

Number of poles / for main current circuit 3

Electrical connections:

Design of the electrical connection

• for main current circuit screw-type terminals

• for auxiliary and control current circuit screw-type terminals

Number of NC contacts / for auxiliary contacts 0

Number of NO contacts / for auxiliary contacts 1

Number of change-over switches / for auxiliary contacts 0

Type of the connectable conductor cross-section / for main

contacts / for box terminal / when using the front clamping point

• solid 2x (1 ... 2.5 mm2), 2x (2.5 ... 6 mm2)

• finely stranded / with conductor end processing 2x (1.5 ... 2.5 mm²), 2x (2.5 ... 6 mm²)

Type of the connectable conductor cross-section / for AWG

conductors / for main contacts / for box terminal

• when using the front c 2x (16 ... 10)

Type of the connectable conductor cross-section

• for auxiliary contacts

• solid 2x (0.5 ... 2.5 mm²)

• finely stranded / with conductor end processing 2x (0.5 ... 1.5 mm²)

• for AWG conductors / for auxiliary contacts 2x (20 ... 14)

• finely stranded / with wire end proc 2x (20 ... 16)

Ambient conditions:

3RW3017-1BB04

Page 3/ 02/13/2013

subject to modifications