Datasheet

ManualsBrandsSiemens ManualsAutomationSoft Starter 80A 400V 45kW 24VAC/DC

Data sheet 3RW30 46-1BB04

SIRIUS soft starter S3 80 A, 45 kW/400 V, 40 °C 200-

480 V AC, 24 V AC/DC Screw terminals

General technical data

Product brand name SIRIUS

Product feature

● integrated bypass contact system

Yes

● Thyristors

Yes

Product function

● Intrinsic device protection

● motor overload protection

● Evaluation of thermistor motor protection

● External reset

● Adjustable current limitation

● inside-delta circuit

Product component Motor brake output No

Reference identifier acc. to DIN EN 61346-2 Q

Reference indentifier acc. to DIN 40719 extended

according to IEC 204-2 acc. to IEC 750

Power Electronics

Product designation Soft starter

3RW30 46-1BB04 Subject to change without notice

Page 1/

Summary of content (7 pages)

PAGE 1
Data sheet 3RW30 46-1BB04 SIRIUS soft starter S3 80 A, 45 kW/400 V, 40 °C 200480 V AC, 24 V AC/DC Screw terminals General technical data Product brand name SIRIUS Product feature ● integrated bypass contact system Yes ● Thyristors Yes Product function ● Intrinsic device protection No ● motor overload protection No ● Evaluation of thermistor motor protection No ● External reset No ● Adjustable current limitation No ● inside-delta circuit No Product component Motor brake output No Refere
PAGE 2
Operating current ● at 40 °C rated value A 80 ● at 50 °C rated value A 73 ● at 60 °C rated value A 66 W 22 000 W 45 000 Yielded mechanical performance [hp] for three-phase AC motor at 200/208 V at standard circuit at 50 °C rated value hp 20 Operating frequency rated value Hz 50 ... 60 Relative negative tolerance of the operating frequency % -10 Relative positive tolerance of the operating frequency % 10 Operating voltage at standard circuit rated value V 200 ...
PAGE 3
Relative positive tolerance of the control supply voltage at DC % Display version for fault signal 10 red Mechanical data Size of engine control device S3 Width mm 70 Height mm 170 Depth mm 190 Mounting type screw and snap-on mounting Mounting position With vertical mounting surface +/-10° rotatable, with vertical mounting surface +/- 10° tiltable to the front and back Required spacing with side-by-side mounting ● upwards mm 60 ● at the side mm 30 ● downwards mm 40 m 300 Wire l
PAGE 4
Type of connectable conductor cross-sections at AWG conductors for main contacts for box terminal ● using the back clamping point 10 ... 2/0 ● using the front clamping point 10 ... 2/0 ● using both clamping points 2x (10 ... 1/0) Type of connectable conductor cross-sections for DIN cable lug for main contacts ● finely stranded 2 x (10 ... 50 mm²) ● stranded 2x (10 ... 70 mm²) Type of connectable conductor cross-sections for auxiliary contacts ● solid 2x (0.5 ... 2.
PAGE 5
General Product Approval Test Certificates Type Test Certificates/Test Report EMC other Special Test Certificate Declaration of Conformity Railway Miscellaneous Confirmation Vibration and Shock UL/CSA ratings Yielded mechanical performance [hp] for three-phase AC motor ● at 220/230 V — at standard circuit at 50 °C rated value hp 25 hp 50 ● at 460/480 V — at standard circuit at 50 °C rated value Contact rating of auxiliary contacts according to UL B300 / R300 Further information Simulation To
PAGE 6
181.2 130 5 170 70 8 32 160.8 4.