Datasheet

3SB3 Pushbuttons and Indicator Lights, 22 mm
Inscriptions
Laser inscriptions
13/69
Siemens IC 10 · 2012
13
■ Overview
Inscription of actuators and indicators
Actuators and indicators of plastic as well as metal version can
be optionally inscribed with a laser.
Pushbutton (metal) with laser inscription
The actuators of the pushbuttons, illuminated pushbuttons,
mushroom pushbuttons and illuminated mushroom pushbuttons
can be inscribed as well as the lenses of the indicator lights.
Selector switches can be inscribed only if they are made of plas-
tic (only one text line on the front ring).
Pushbutton and selector switch (plastic) with laser inscription
Version
A letter height of 4 mm is used as standard for text inscriptions:
The typeface used is Arial. Other letter heights and typefaces
are possible, but must be specified when ordering.
For round buttons and lenses, the possible number of charac-
ters per line is:
• 10 characters for one line of text
• 8 characters for 2 lines of text
• 6 characters for 3 lines of text,
but 10 characters in the middle line
On square buttons and lenses, 10 characters are possible per
line.
Ordering notes
When ordering, supplement the Order No. of the actuator or the
indicator light with "–Z" and an order code:
• Text line in upper/lower case, always upper case for beginning
of line (e.g. "Lift off"): Y10
• Text in upper case (e.g. "LIFT OFF"): Y11
• Text in lower case (e.g. "lift off"): Y12
• Text in upper/lower case, all words begin with capital letters
(e.g. "Lift Off"): Y15
• Symbol with number according to ISO 7000 or IEC 60417: Y13
• Any inscription or symbol according to order form supple-
ment: Y19
Additional price per unit for Y10 to Y19 on request.
When ordering, specify the required inscription in plain text in
addition to the order number and order code. In the case of spe-
cial inscriptions with words in languages other than German,
give the exact spelling and specify the language (see ordering
example 1).
In the case of multi-line inscriptions, the text must be assigned
to the respective line, e.g. "Z1 = Lift, Z2 =Lower". For long words
you can also specify the end-of-line division.
Symbols can also be ordered with numbers according to
ISO 7000 or IEC 60417 (see ordering examples 2 and 3).
For special symbols (order code Y19), a CAD drawing in
DXF format can be submitted.
Ordering example 1
A round pushbutton with the inscription "Reset" is required:
3SB30 00–0AA41–Z
Y10
Z = Reset (English)
Ordering example 2
A square pushbutton inscribed with symbol No. 5389 according
to IEC 60417 is required:
3SB31 10–0AA31–Z
Y13
Z = 5389 IEC
Ordering example 3
A round pushbutton inscribed with symbol No. 1118 according
to ISO 7000 is required:
3SB30 00–0AA41–Z
Y13
Z = 1118 ISO
IC10_13.book Seite 69 Donnerstag, 19. Januar 2012 2:24 14
© Siemens AG 2012